Neath Port Talbot · Wales
Bath Repair for Tonmawr homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Tonmawr, with a one-year guarantee on every repair.
- Repairs from £95
- Rust by the waste and overflow
- A chip where the taps sit
What we cannot put right
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we cannot get to from below
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Bath repair at your home in Tonmawr
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Common call-outs are for damage beneath the taps and scuffs and scratches in the surface, in pressed steel enamel, roll-top & freestanding and cast iron enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Tonmawr (SA12)
- Area hub
- Neath Port Talbot
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Tonmawr
Tonmawr is about 3 miles east of Neath, in Neath Port Talbot. Wherever you are in the SA12 postcode area, we carry out the work at your property. We work in all 100 towns and villages in Neath Port Talbot, from the larger towns to small villages.
All of SA12 is within our area. Local streets include Maes-Gwyn, Ton-Mawr Road and Dan-y-Coed, and we cover them all. Neighbouring places we cover include Efail Fach (1 mile south-west), Michaelston (1 mile east), Pontrhydyfen (1 mile south), Rock (2 miles south) and Pwll-y-glaw (2 miles south). Further out, we also cover Neath (3 miles west), Port Talbot (5 miles south-west), Sandfields (5 miles south-west), Mount Pleasant (3 miles west), Baglan Moors (4 miles south-west) and Sandfields West (5 miles south-west).
What’s near Tonmawr
Typical jobs here are in homes near The Colliers pub and Cefn Saeson Comprehensive School. Tonmawr’s nearest station is Neath station, about 3.1 miles west. Further afield, we also cover the area around Neath Museum (2.9 miles west) and Tonna Hospital (2.2 miles north-west). Not far away are Cefn Morfudd and Gnoll Estate Country Park lake 1.
- Local facilities include Pelenna (0.9 miles south-west)
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Tonmawr clients choose us
- Most jobs done in one visit
- No need to remove anything
- We’ll tell you if it’s not worth repairing
- A fixed quote before booking
See our pricing and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
How we price bath repair
Repairs from £95. There is no area surcharge for Tonmawr. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How many areas need work
- The material
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Two or three clear pictures are normally enough. Try to include:
- The material, if you know it
- A close-up of the damage, in focus
- A picture taken from further back
- A coin or ruler next to the damage for scale
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a few hours, and you can get on with other things while we’re there.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the following day.
How to prepare
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t scrub with anything abrasive
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Also near Tonmawr
Also in Tonmawr
FAQs for Tonmawr
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Which areas do you work in?
All of Neath Port Talbot, and the rest of the UK. Travel is included in the price.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
About our accreditations · Every repair comes with a one-year guarantee.
