Neath Port Talbot · Wales
Bath chip & crack repair in Tonna, Neath Port Talbot
Problem with your bath in Tonna? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Chips on the rim or sides
Bath repair in Tonna without replacing anything
Most of our bath repairs take a few hours, and you can generally bathe again the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. If you are dealing with snagging damage from a refit and holes from dropped items, we can help.
Every repair is covered by a one-year guarantee, wherever you are in Neath Port Talbot.
- Area
- Tonna (SA11)
- Region
- Neath Port Talbot
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Tonna
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
People generally call us when they notice something like this:
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- A failed DIY repair that’s discoloured or lifting
- Scuffs and scratches in the surface
Questions to ask before you book
- What preparation is included
- Who will actually do the work
- The length of the guarantee and what it covers
- If travel is included in the price
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Aftercare tips
How the surface is treated afterwards matters:
- Have new chips seen to early
- Don’t scrub with anything abrasive
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Tonna questions
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Tonna
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- The material
- How many items we do on one visit
- How hard the colour is to match
- Any earlier repairs that need removing first
Our prices are the same across the UK, with no extra for Tonna. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Landlord and trade work in Tonna
Landlords, letting agents and housing providers in Tonna use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Tonna and nearby
Tonna is about 2 miles north-east of Neath, in Neath Port Talbot. Our repair technicians come to clients in Tonna and nearby villages, so you don’t need to take anything anywhere. We work in 100 places in Neath Port Talbot.
We cover every part of SA11. Whether you live on St Anne's Drive, Wenallt Road and St Anne's Terrace or a nearby road, a technician can come to you. Neighbouring places we cover include Aberdulais (1 mile north), Cil-ffriw (1 mile north-west), Blaenhonddan (1 mile west), Cimla (2 miles south-west) and Tonmawr (2 miles south-east). We also work in nearby towns such as Port Talbot (6 miles south), Sandfields (6 miles south), Baglan Moors (5 miles south), Sandfields West (6 miles south), Sandfields East (6 miles south) and Pontardawe (5 miles north-west).
Around Tonna
Locally, our jobs take us to homes close to Whittington Arms, Llangatwg Community School and Tonnau Primary Community School. The closest station to Tonna is Neath station, about 1.7 miles south-west of the centre. Nearby you will also find Pelenna (2.3 miles south) and Gnoll House (1.3 miles south-west). Open spaces near Tonna include Cefn Morfudd and Gnoll Estate Country Park lake 1.
Places near Tonna
Also in Tonna
About our accreditations · Every repair comes with a one-year guarantee.
