Nottingham · England
Bath Repair in Top Valley
Problem with your bath in Top Valley? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Impact holes in acrylic
What bath repair costs
Repairs from £95. You’ll know the full cost before booking. We look at:
- The colour and finish to match
- Access to the area
- How many items we do on one visit
- The material
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Any details about the material
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
How we handle bath repair in Top Valley
Most of our bath repairs take a few hours, and you can typically bathe again the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, acrylic and pressed steel enamel, and people most frequently call us about cracks in an acrylic bath and rust spots around the plughole.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Top Valley (NG5, NG6)
- Area hub
- Nottingham
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
About Top Valley
Top Valley is about 1 mile east of Bulwell, in Nottingham. Anywhere in NG5, a technician comes to you. Our technicians cover all 51 towns and villages across Nottingham, from the larger towns to small villages. We work right across the region, from Top Valley to Birmingham (47 miles away).
Our visits in NG5 and NG6 are booked in the same way as anywhere else. Jobs here include addresses on Hove Road, Loftus Lane and Edgware Road. Nearby, we also work in Rise Park (1 mile north), Bulwell (1 mile west), Warren Hill (1 mile north-east), Daybrook (2 miles east) and Bestwood Village (2 miles north). Larger places within reach include Sneinton (4 miles south-east), St Ann's (3 miles south-east), Clifton (7 miles south), The Park Estate (3 miles south), Hockley (3 miles south-east) and Lenton (3 miles south).
What’s near Top Valley
Typical jobs here are in homes near St Philip's Church, The William Peverel pub and Henry Mellish School and Specialist Sports College and the streets around them. Other local landmarks include Bestwood Country Park (1.5 miles north), Henry Whipple Primary School (within half a mile south-east) and Park Vale Academy (0.6 miles north). For rail, the closest station is Bulwell station, about 0.8 miles west. Nearby you will also find Nottingham Castle (3.6 miles south) and Victoria Centre (3.2 miles south). For a walk, there’s Colwick Woods.
Repairing versus replacing in Top Valley
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- A year’s guarantee on all work
- No extra charge for your area
- Colour mixed on the day to match
- Normally one visit, start to finish
Read our prices page and resurfacing vs replacement cost guide.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Common problems we fix in Top Valley
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
If you can see any of these, send us a picture:
- A kit repair that didn’t last
- Impact holes in acrylic
- Damage beneath the taps
- Chips on the rim or sides
Before booking anyone
- Whether the price covers travel
- What protection goes down before work starts
- The length of the guarantee and what it covers
- What prep work is covered
Places near Top Valley
More services for Top Valley
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Top Valley as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
How the visit works
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
- Keep a parking space free if you can
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Read more
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Top Valley
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Top Valley: your questions answered
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
What does bath repair cost?
Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
When can I have a bath again?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
About our accreditations · Every repair comes with a one-year guarantee.
