Nottingham · England
Bath Repair in Daybrook
We travel to Daybrook for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Snagging damage from a refit
- Rusty patches near the plughole
Should you replace it?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Colour mixed on the day to match
- One-year guarantee on every repair
- Rooms protected and left tidy
- Most jobs done in one visit
See our pricing and guide to resurfacing and replacement costs.
How we handle bath repair in Daybrook
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There is no need to book a plumber or tiler, because the bath does not move. Whether it’s a kit repair that didn’t last and rusty patches near the plughole, we can usually put it right.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Daybrook (NG5)
- Region
- Nottingham
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep pets and children out of the room while we work
- Make sure the area is dry
- Open a window if you can
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Landlords, agents and businesses in Daybrook
Landlords, letting agents and housing providers in Daybrook use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Our work in Daybrook
Daybrook is about 1 mile west of Arnold, in Nottingham. Jobs in Daybrook are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover all 51 towns and villages across Nottingham. Our nearest city page is Birmingham, about 48 miles away.
Every address in NG5 is within our area. Jobs here include addresses on Dean Road, Park Road and Mill Lane. With the A60 close by, Daybrook is easy for our repair technicians to reach. Neighbouring places we cover include Arnold (1 mile east), Red Hill (1 mile north), Warren Hill (1 mile north-west), Top Valley (2 miles west) and Rise Park (2 miles north-west). Further out, we also cover Nottingham (3 miles south-west), Sneinton (3 miles south), St Ann's (3 miles south), Clifton (7 miles south), The Park Estate (4 miles south) and Hockley (3 miles south).
Around Daybrook
Our customers here include homes close to Arnbrook Primary School, St. Paul's Church and The Ernehale pub, among other places. Nearby too are Woodthorpe Grange Park (1.1 miles south) and Redhill Academy (0.7 miles north-east). The closest station to Daybrook is Bulwell station, about 2.4 miles west. Nearby you will also find South Nottinghamshire Hussars Museum (2.3 miles west) and Victoria Centre (3 miles south). Green spaces nearby include Colwick Woods.
Daybrook questions
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Prices and what affects them
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- The type of damage
- Unusual colours or finishes
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Where you are, by postcode
- Any details about the material
- A picture taken from further back
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Aftercare tips
How the surface is treated afterwards matters:
- Don’t leave razors or cans standing in the bath
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
- Cover the bath during DIY or decorating
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Nearby places to Daybrook
Other services in Daybrook
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Wear across the entire surface, which needs re-enamelling
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly.
Materials we work on in Daybrook
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
