Hampshire · England
Bath Repair in Tourner Bury
Local bath repair for Tourner Bury: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
Signs you need bath repair in Tourner Bury
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Most people contact us after spotting something like this:
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
- Cracks in an acrylic bath
- Damage beneath the taps
Comparing quotes
- If travel is included in the price
- What protection goes down before work starts
- What the guarantee covers, and for how long
- When it can be used again
Bath repair at your home in Tourner Bury
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include damage beneath the taps and deep scratches in acrylic, in whirlpool & spa baths, acrylic and pressed steel enamel.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Tourner Bury (PO11)
- Area hub
- Hampshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Tourner Bury
Also in Tourner Bury
How the visit works
We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and we leave the room as we found it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Open a window if you can
- Point us to the nearest place to park
Ask for a price
Upload pictures of the damage and a wider shot of the whole item, and tell us you are in Tourner Bury, and we’ll come back with a fixed quote.
Related advice
Repair or replace in Tourner Bury?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- One price list for the entire UK
- Fixed prices from your photos
- A year’s guarantee on all work
- Nothing taken out or refitted
See our pricing and resurfacing vs replacement cost guide.
Aftercare tips
To keep it looking its best for years:
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Make sure an acrylic bath is firm underfoot
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- How hard the colour is to match
- Any earlier repairs that need removing first
- How many items we do on one visit
We charge the same wherever you are, so there’s no premium for Tourner Bury. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear photos are typically enough. Try to include:
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Natural light rather than flash
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Tourner Bury and nearby
Tourner Bury is about 1 mile north-east of South Hayling, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. You can also see our page for London, about 62 miles away.
Postcode districts we cover here: PO11. We regularly work on streets such as Tournerbury Lane, St Benedict Road and Beech Grove and the roads around them. We also cover the places around Tourner Bury: South Hayling (1 mile south-west), West Town (1 mile west), Tye (2 miles north), Stoke (2 miles north) and North Hayling (2 miles north). Further out, we also cover Gosport (8 miles west), Havant (5 miles north), Fareham (11 miles west), Horndean (8 miles north), Waterlooville (7 miles north-west) and Petersfield (15 miles north).
What’s near Tourner Bury
Typical jobs here are in homes near The Hayling College, Mengham Junior School and St Mary's Church, among other places. Tourner Bury’s nearest station is Warblington station, about 4.1 miles north of the centre. Well-known places in the area include Eastney Beam Engine House (3.6 miles west) and St James Hospital (3.8 miles west). The countryside around Tourner Bury includes Hayling Billy.
When we would advise against a repair
Before booking, it’s worth knowing the limits:
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Tourner Bury questions
Do you cover Tourner Bury?
Yes. We cover the whole UK and come to Tourner Bury. Send us pictures for a fixed quote, or call 0345 017 0787.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Hampshire.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Is a holed acrylic bath repairable?
Usually. Send us a photo of the hole and one from under the bath if you can.
About our accreditations · Every repair comes with a one-year guarantee.
