Hampshire · England

Bath Resealing for Tourner Bury homes

Bath, shower and sink resealing with new mould-resistant silicone at your home in Tourner Bury, with a one-year guarantee on every repair.

  • Damp near the bath
  • Sealant that’s split or lifting
  • Silicone smeared on tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Tourner Bury homes

About our bath resealing in Tourner Bury

Baths, trays, basins and kitchen worktops all get resealed, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours. Common call-outs are for black spots in the silicone and water getting behind the bath or tray, on baths, shower trays & enclosures and kitchen worktops & sinks.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Technician in a mask working on a freestanding roll-top bath
Location
Tourner Bury (PO11)
Region
Hampshire
Warranty
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

How we price bath resealing

We price every job individually, from your photos. What matters most is:

  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • Access to the area
  • The colour and finish to match

Our prices are the same across the UK, with no extra for Tourner Bury. What changes the price is the job itself: the material, the amount of damage and how many items.

Send pictures for a quote

Two or three clear pictures are generally enough. It helps if you send:

  • The postcode, so we can plan the visit
  • One picture of the entire bath or shower
  • A close-up of the damage, in focus
  • Something in shot to show the size

Send us photos of the damage and a wider shot of the entire item, with your PO11 postcode, and we will come back with a fixed quote.

Signs you need bath resealing in Tourner Bury

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.

People typically call us after spotting one of these:

  • Old sealant that looks dirty
  • Unsealed corners
  • Damp near the bath
  • Mould you can’t clean out

Questions to ask before you book

  • When it can be used again
  • Whether cleaning and preparation are in the price
  • Whether there are any call-out or travel charges
  • How the colour is matched

Choosing a repair company

Tourner Bury: your questions answered

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Why does my sealant keep splitting?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

Is there any odour?

Some materials have a smell while they’re applied. It fades as everything cures.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Do you seal over the old sealant?

Never over old. The old sealant is cut out and the joint cleaned and dried.

What happens next?

We review the photos and send a fixed quote with dates.

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

How to look after the repair

Most damage we see is avoidable. A few tips:

  • Wipe the joints dry after use
  • Open a window after bathing
  • Reseal at the first sign of lifting
  • Give the seal a regular clean

Avoid scraping the joints, and keep shampoo bottles off the joints.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.

Landlords, agents and businesses in Tourner Bury

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We work for landlords, letting agents and housing providers in Tourner Bury as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Honest limits

A few problems are outside what a surface repair can do:

  • Hollow or loose tiles
  • Very wide gaps that need a trim
  • Movement in the bath or tray

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Kitchen worktops & sinks

How it works

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes about two hours for a bath, and we leave the room as we found it.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Have a window or extractor fan available
  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit

Ask for a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can give you a fixed price without visiting.

Get a fixed price

Advice

Tourner Bury and the surrounding area

Tourner Bury is about 1 mile north-east of South Hayling, in Hampshire. We visit customers in Tourner Bury, so you don’t need to take anything anywhere. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Tourner Bury to London (about 62 miles away).

Postcode districts we cover here: PO11. From Tournerbury Lane, St Benedict Road and Beech Grove or a nearby road, we can come to you. If you’re just outside Tourner Bury, we cover South Hayling (1 mile south-west), West Town (1 mile west), Tye (2 miles north), Stoke (2 miles north) and North Hayling (2 miles north). We also work in nearby towns such as Gosport (8 miles west), Havant (5 miles north), Fareham (11 miles west), Horndean (8 miles north), Waterlooville (7 miles north-west) and Petersfield (15 miles north).

Around Tourner Bury

Our clients here include homes close to The Hayling College, Mengham Junior School and St Mary's Church and the streets around them. The nearest railway station is Warblington station, about 4.1 miles north of the centre. Other landmarks nearby include Eastney Beam Engine House (3.6 miles west) and St James Hospital (3.8 miles west). Open spaces near Tourner Bury include Hayling Billy.

Map of Tourner Bury © OpenStreetMap contributors

Repairs by material

Baths

We fill the bath before sealing, to open the joint fully.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.