Gloucestershire · England
Bath Repair for Falfield homes
Local bath repair for Falfield: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Deep scratches in acrylic
About our bath repair in Falfield
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and people most frequently call us about holes from dropped items and cracks in an acrylic bath.
All our work comes with our one-year guarantee, wherever you are in Gloucestershire.
- Area
- Falfield (GL12)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Falfield
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
Most people get in touch after spotting something like this:
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- A chip where the taps sit
- Holes from dropped items
Comparing quotes
- Whether they match the colour on site
- How your room will be protected
- How long it needs to cure
- Whether the price is fixed and includes VAT
Covering Falfield
Falfield is about 3 miles north-east of Thornbury, in Gloucestershire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Falfield is one of 470 towns and villages in Gloucestershire where we work. You can also see our page for Birmingham, about 62 miles away.
We cover every part of GL12 and the streets around it. That includes homes on Selman Drive, Anstey Gardens and Glebe Meadows. Neighbouring places we cover include Moorslade (1 mile north-west), Sundayshill (1 mile west), Lower Stone (1 mile north-west), Stone (1 mile north) and Woodford (2 miles north-east). Larger places within reach include Stroud (12 miles north-east), Quedgeley (15 miles north-east), Lydney (7 miles north-west), Kingsway Village (15 miles north-east), Cam (6 miles north-east) and Stonehouse (11 miles north-east).
Near you in Falfield
Around Falfield, we work in homes near Church of St George and the streets around them. A little further out are Thornbury Castle (3.4 miles south-west) and Thornbury and District Museum (3.6 miles south-west). Open spaces near Falfield include Nind Nature Reserve.
When we’d advise against a repair
It helps to know what we cannot do:
- Flexing caused by a failed cradle or loose feet
- Wear across the whole surface, which needs re-enamelling
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we will tell you honestly before booking.
Materials we work on in Falfield
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- Work done at your home or business
Take a look at our pricing or bath cost comparison.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a few hours.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Have a window or extractor fan available
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Towns and villages near Falfield
Other services in Falfield
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Don’t scrub with anything abrasive
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
What affects the price in Falfield
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- The colour and finish to match
- The type of damage
- How many areas need work
- Whether we combine several jobs
We charge the same wherever you are, with no extra for Falfield. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- Any details about the material
- A coin or ruler next to the damage for scale
- Where you are, by postcode
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Falfield: your questions answered
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
What areas do you cover?
Across the UK, so Falfield is covered. Prices do not change with location.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
What happens once I’ve sent photos?
We come back with a fixed price, plus dates. You’re under no obligation.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
About our accreditations · Every repair comes with a one-year guarantee.
