Cornwall · England
Bath chip & crack repair in Trelake, Cornwall
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Trelake and across Cornwall. Send pictures for a free, fixed quote.
- Repairs from £95
- Damage beneath the taps
- Scuffs and scratches in the surface

Bath repair in Trelake without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. Typical jobs include an old repair that has yellowed or come loose and a chipped rim or side, in acrylic, roll-top & freestanding and whirlpool & spa baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Trelake (PL34)
- Region
- Cornwall
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026

Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
What affects the price in Trelake
Repairs from £95. We charge the same across the UK, including Trelake. What changes the price is:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The material and finish
- Unusual colours or finishes
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- Details of any past repairs
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Your questions about bath repair in Trelake
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
When can I have a bath again?
Generally within a day, depending on the repair.
What areas do you cover?
The whole UK, including all of Cornwall. Just include your postcode and we will offer you dates.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Trelake and nearby
Trelake is about 12 miles north of Bodmin, in Cornwall. Jobs in Trelake are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in all 644 towns and villages across Cornwall, from the larger towns to small villages.
All of PL34 is within our area. If you are just outside Trelake, we cover Treknow (1 mile north), Tintagel (1 mile north), Trenale (1 mile north-east), Bossiney (1 mile north) and Delabole (2 miles south-east). Within a short drive, we also cover Bodmin (12 miles south), Wadebridge (10 miles south-west), Padstow (11 miles south-west), Camelford (3 miles south-east), Boscastle (4 miles north-east) and Port Isaac (5 miles south-west).
Landmarks near Trelake
In Trelake, that means homes near St Paul's Church and Tintagel Primary School and the streets around them. Well-known places in the area include Museum of Witchcraft and Magic (3.8 miles north-east) and Tintagel Castle (1.5 miles north). Not far away are Condolden.
Other services in Trelake
Should you replace it?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book.
What you get with us
- No need to remove anything
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
- Every repair guaranteed for a year
Read our prices page or resurfacing vs replacement cost guide.
How the visit works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the following day, the bath is ready to use.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
Signs you need bath repair in Trelake
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
Most people contact us when they notice one of these:
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
What your quote should include
- Whether the price is fixed and includes VAT
- What prep work is covered
- If travel is included in the price
- The length of the guarantee and what it covers
Landlords, agents and businesses in Trelake
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in Trelake use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.

