South Gloucestershire · England

Bath Repair in Two Mile Hill

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Two Mile Hill, with a one-year guarantee on every repair.

  • Repairs from £95
  • A chipped rim or side
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Two Mile Hill homes

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • Put a towel in the bath if you are working above it
  • Rinse it down after each bath
  • If an acrylic bath flexes, have its feet adjusted
  • Keep metal cans and razors off the surface

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Bath repair in Two Mile Hill, done in place

Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people get in touch are scuffs and scratches in the surface and a hole punched through by something heavy.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
Two Mile Hill (BS15)
Region
South Gloucestershire
Warranty
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Two Mile Hill questions

Do you repair coloured baths?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What do you need from me?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

How long before I can use the bath?

Normally by the following day, depending on the repair.

Can you repair a crack in an acrylic bath?

Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Is it worth repairing rather than replacing?

Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What a repair can’t fix

It helps to know what we can’t do too:

  • A steel bath rusted through
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in acrylic we cannot reach from underneath

Send us pictures and we’ll tell you honestly before you book.

Materials we work on in Two Mile Hill

  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic

Repairs by material

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Repair or replace: which is better?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Two Mile Hill. What changes the price is the job itself: the material, the amount of damage and how many items.

Why us?

  • We will tell you if it’s not worth repairing
  • Dust sheets down, tidy finish
  • Technicians who travel to you, UK-wide
  • Same prices wherever you are

Read our prices page or resurfacing vs replacement cost guide.

How we price bath repair

Repairs from £95. Every quote is fixed and free. What we look at:

  • Previous DIY repairs that have to come out
  • The size and number of damaged areas
  • The material
  • Whether it’s a chip, crack, burn or wear

The price reflects the work involved, not your postcode. The full price is agreed before booking.

How to get a fixed price

You can generally get a fixed price without us visiting. To make it quick:

  • A photo taken from further back
  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before

To get a price, send a couple of pictures through our quote form or call us. We’ll say straight away if a repair is the right fix.

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, usually by the following day, the bath is ready to use.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

Get a quote

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.

Get a fixed quote

Related advice

Two Mile Hill and the surrounding area

Two Mile Hill is about 1 mile south-east of Fishponds, in South Gloucestershire. Clients in Two Mile Hill get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We cover all 110 towns and villages in South Gloucestershire. You can also see our page for Birmingham, about 74 miles away.

Our technicians cover all of the BS15 postcode area. Local streets include Primrose Lane, Talbot Avenue and Two Mile Hill Road, and we cover them all. Neighbouring places we cover include Burchells Green (1 mile west), Chester Park (1 mile north-west), Whiteway (1 mile west), Hillfields (1 mile north) and Soundwell (1 mile north-east). Within a short drive, we also cover Yate (7 miles north-east), Bradley Stoke (5 miles north), Thornbury (10 miles north), Patchway (5 miles north-west), Stoke Gifford (4 miles north) and Morton (11 miles north).

What’s near Two Mile Hill

We visit homes around The Kings Arms, Church of St Michael and Two Mile Hill Primary School and the streets around them. Also close by are John Cabot Academy (0.5 miles south) and Troopers Hill (0.9 miles south-west). The nearest railway station is Lawrence Hill station, about 2 miles west. Well-known places in the area include Barton Regis Rural District (1.8 miles west) and Willsbridge Castle (2.5 miles south-east). Open spaces near Two Mile Hill include Lodge Hill.

Map of Two Mile Hill © OpenStreetMap contributors

Can I fix it myself?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

When to call us in Two Mile Hill

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Look out for these signs:

  • Chips on the rim or sides
  • Chips under the taps
  • Rusty patches near the plughole
  • A cracked acrylic bath

Before booking anyone

  • Whether a trained technician does the job
  • How your room will be protected
  • Whether the price covers travel
  • What prep work is covered

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.