Northumberland · England
Bath Repair in Ulgham
Our repair technicians come to Ulgham for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A hole punched through by something heavy
- Chips caused by builders
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Bath repair in Ulgham without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Whether it’s a cracked acrylic bath and scratches you can feel with a fingernail, we can normally put it right, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Ulgham (NE61)
- County
- Northumberland
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
Before you book, it’s worth knowing the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Also in Ulgham
Signs you need bath repair in Ulgham
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- Chips under the taps
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
Before booking anyone
- Whether there are any call-out or travel charges
- How changes to the job are handled
- What protection goes down before work starts
- A fixed quote, and whether VAT is included
What bath repair costs
Prices start from £95. You will not pay by the hour. The price is based on:
- What the surface is made of
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A wider photo showing the whole bath
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Common questions in Ulgham
What information do you need?
Use the quote form or ring 0345 017 0787.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
How much does bath repair cost in Ulgham?
Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
How to care for the repair
Once the work has cured, treat it gently:
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath does not move when you stand in it
- Do not leave a fresh chip for long
- Do not leave razors or cans standing in the bath
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Where we work around Ulgham
Ulgham is about 4 miles north-west of Ashington, in Northumberland. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 189 places in Northumberland. Our jobs stretch from Ulgham to Newcastle upon Tyne (about 16 miles away).
Here we cover the NE61 postcode area. Jobs here include addresses on The Croft, Orchard Close and Forge Estate. Neighbouring places we cover include Stobswood (2 miles north), Linton (2 miles east), Longhirst (2 miles south), Widdrington (3 miles north-east) and Ellington (3 miles east). We also work in nearby towns such as Blyth (8 miles south-east), Cramlington (10 miles south), Ashington (4 miles south-east), Morpeth (5 miles south-west), Bedlington (6 miles south) and Alnwick (13 miles north).
Landmarks near Ulgham
Typical jobs here are in homes near Forge Inn and Church of St John the Baptist. The closest station to Ulgham is Widdrington station, roughly 1.5 miles north-east. Further afield, we also cover the area around St George's Park (3.6 miles south-west) and Morpeth Rural District (3 miles south-west).
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips, and we’ll tell you if anything changes.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Mention any parking restrictions or tricky access
Get a quote
Send us a picture of the damage and one of the entire item, and tell us you’re in Ulgham, and we will come back with a fixed quote.
Read more
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
