Worcestershire · England
Bath Repair in Upper Marlbrook
Damaged bath in Upper Marlbrook? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Damage beneath the taps

When to call us in Upper Marlbrook
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
It’s worth getting a quote if you see:
- Chips on the rim or sides
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- Cracks in an acrylic bath
Comparing quotes
- What the guarantee covers, and for how long
- How long it needs to cure
- What aftercare is recommended
- What prep work is covered
Bath repair in Upper Marlbrook without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. We are often asked to fix chips under the taps and hairline or through cracks in acrylic, across cast iron enamel, roll-top & freestanding and pressed steel enamel.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Upper Marlbrook (B60, B61)
- County
- Worcestershire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

What affects the price in Upper Marlbrook
Prices start from £95. Prices are worked out job by job. The main factors are:
- The material
- How hard the colour is to match
- The type of damage
- Whether we combine several jobs
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can typically get a fixed quote without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A wider photo showing the whole bath
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
- Give the bath a quick rinse after use
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Questions from Upper Marlbrook
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you work in Upper Marlbrook?
Yes, we do. We send a technician to Upper Marlbrook for every job, with no extra charge for travel.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Also near Upper Marlbrook
Other services in Upper Marlbrook
Landlords, agents and businesses in Upper Marlbrook
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
For anyone letting property in or around Upper Marlbrook, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Upper Marlbrook and the surrounding area
Upper Marlbrook is about 2 miles north-east of Bromsgrove, in Worcestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Upper Marlbrook is one of 376 towns and villages in Worcestershire where we work. Our nearest city page is Birmingham, about 9 miles away.
We cover every part of B60 and B61. Whether you live on Greenfield Avenue, Lickey Rock and Linehouse Lane or anywhere nearby, we can come to you. Neighbouring places we cover include Lower Marlbrook (1 mile north-west), Marlbrook (1 mile south-west), Lydiate Ash (1 mile north), Catshill (1 mile west) and Lickey End (1 mile south). We also work in nearby towns such as Worcester (14 miles south-west), Redditch (6 miles south-east), Kidderminster (9 miles west), Droitwich Spa (9 miles south-west), Stourport-on-Severn (11 miles west) and Bewdley (12 miles west).
Around Upper Marlbrook
Our clients here include homes close to Catshill First School, St Luke and Waseley Hills High School. Also close by are Lickey Hills Country Park (1.3 miles north-east) and Miller & Carter pub (under half a mile west). The nearest railway station is Barnt Green station, roughly 1.9 miles east. Other landmarks nearby include Norton Collection Museum (2 miles south-west) and Barnsley Hall Hospital (1.4 miles south-west). Not far away are Chaddesley Woods National Nature Reserve and Bilberry Hill.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take two to three hours for most chips, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
How to get a price
To get a price, send two or three pictures using our quote form or ring us. We will say right away whether it can be repaired.
Advice
Honest limits
A few problems are outside what a surface repair can do:
- Cracks in acrylic we can’t reach from underneath
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Upper Marlbrook
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
What you get with us
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Colour mixed on the day to match
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.

