Wiltshire · England
Bath Repair in Upper Wraxall
Our repair technicians come to Upper Wraxall for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Deep scratches in acrylic
- Snagging damage from a refit
Bath repair at your home in Upper Wraxall
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site. Our repair technicians work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are cracks in an acrylic bath and scratches you can feel with a fingernail.
All our work is covered by a one-year guarantee.
- Location
- Upper Wraxall (SN14)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Other services in Upper Wraxall
Signs you need bath repair in Upper Wraxall
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Customers normally contact us about:
- Rust spots around the plughole
- A failed DIY repair that’s discoloured or lifting
- Chips under the taps
- Deep scratches in acrylic
Before you book anyone
- When it can be used again
- What the guarantee covers, and for how long
- How the colour is matched
- Who turns up on the day
What we can’t put right
To be straight with you, some problems need a different fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Upper Wraxall
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Landlords, agents and businesses in Upper Wraxall
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Looking after it afterwards
Looking after the surface is easy:
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
- Use a soft cloth and washing-up liquid for everyday cleaning
- Make sure an acrylic bath is firm underfoot
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Upper Wraxall questions
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Which areas do you work in?
Everywhere in the UK, Upper Wraxall included. There’s no extra charge for travel.
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Upper Wraxall. The price depends on:
- The material and finish
- The colour and finish to match
- Any earlier repairs that need removing first
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- A wider photo showing the entire bath
- A close-up of the damage, in focus
If you’re in Upper Wraxall and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Where we work around Upper Wraxall
Upper Wraxall is about 7 miles north-east of Bath, in Wiltshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Upper Wraxall is one of 425 towns and villages in Wiltshire we cover. You can also see our page for Birmingham, about 71 miles away.
Our visits in SN14 work the same way as everywhere else we cover. Neighbouring places we cover include The Shoe (1 mile south-east), Thickwood (2 miles south-east), West Kington (2 miles north), Colerne (2 miles south-east) and Nettleton (2 miles north-east). We also work in nearby towns such as Trowbridge (11 miles south), Chippenham (7 miles east), Calne (12 miles east), Devizes (15 miles south-east), Westbury (15 miles south) and Melksham (9 miles south-east).
Local landmarks in Upper Wraxall
Our customers here include homes close to Church of St James and Marshfield Church of England Primary School, among other places. A little further out are Corsham (3.7 miles east) and Castle Farm Folk Museum (1.9 miles west).
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes two to three hours for most chips, and we’ll tell you if anything changes.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
