Somerset · England
Bath chip & crack repair in Vole, Somerset
We travel to Vole for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A cracked acrylic bath
Keeping it looking good
So the finish stays in good condition for years:
- Ensure an acrylic bath is firm underfoot
- Have new chips seen to early
- Cover the bath during DIY or decorating
- Do not leave razors or cans standing in the bath
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Bath repair in Vole without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for rust by the waste and overflow and a chip where the taps sit, on acrylic, roll-top & freestanding and pressed steel enamel.
Big or small, you get the same one-year guarantee.
- Area
- Vole (TA9)
- Area hub
- Somerset
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Vole
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What areas do you cover?
The whole UK, including all of Somerset. Send your postcode with your photos and we will offer you dates.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
How do I get a price for bath repair in Vole?
Prices start from £95. We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
Do you need bath repair in Vole?
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
- Holes from dropped items
- Scuffs and scratches in the surface
Comparing quotes
- If travel is included in the price
- What protection goes down before work starts
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Same prices wherever you are
- Straight answers about what a repair can do
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or resurfacing vs replacement cost guide.
Vole and nearby
Vole is about 4 miles east of Burnham-on-Sea, in Somerset. From the centre of Vole to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 640 towns and villages in Somerset, from the larger towns to small villages.
We work across TA9 and the streets around it. We also travel to Northwick (1 mile south), Mark Causeway (1 mile south), Battleborough (1 mile west), Rooks Bridge (2 miles north) and Watchfield (2 miles south-west). Within a short drive, we also cover Bridgwater (9 miles south-west), Burnham-on-Sea (4 miles west), Wells (11 miles east), Street (11 miles south-east), Glastonbury (11 miles south-east) and Cheddar (6 miles north-east).
Landmarks near Vole
We visit homes around Hill Brow Preparatory School for Boys, among other places. Vole’s nearest station is Highbridge & Burnham station, roughly 3.2 miles south-west. Nearby you will also find Burnham on Sea War Memorial Hospital (3.7 miles west). For a walk, there is Wavering Down.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Landlord and trade work in Vole
We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Tell us about parking, stairs or access
Get a quote
For a price in Vole, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Vole
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Also in Vole
About our accreditations · Every repair comes with a one-year guarantee.
