Cumbria · England
Bath Repair in Wall End
Chip and crack repairs to enamel, acrylic and cast iron baths in Wall End, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chip where the taps sit
- Rust spots around the plughole
How we handle bath repair in Wall End
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include a chip where the taps sit and chips along the edge of the bath, in cast iron enamel, pressed steel enamel and roll-top & freestanding.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Wall End (LA17)
- Region
- Cumbria
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Wall End
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Straight answers about what a repair can do
See our full price list and guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
What affects the price in Wall End
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- How much damage there is
- The material and finish
- Access to the area
- What kind of damage it is
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Any details about the material
- Natural light rather than flash
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we can’t put right
Some jobs aren’t right for a repair, including:
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
Send us photos and we will tell you honestly.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Also near Wall End
What else we do in Wall End
Common questions in Wall End
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your photos and we’ll quote them together.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Something went through my bath. Can it be fixed?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Will the repair show?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have a window or extractor fan available
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
How to get a price
For a price in Wall End, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
- Cover the bath during DIY or decorating
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Covering Wall End
Wall End is about 5 miles north-west of Ulverston, in Cumbria. Whether you’re in the middle of Wall End or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Wall End is one of 438 places in Cumbria we cover. Our jobs stretch from Wall End to Liverpool (about 58 miles away).
Postcode districts we cover here: LA17. From Marsh Garth, Combe Crescent and Burlington Close or anywhere nearby, a technician can come to you. Nearby, we also work in Kirkby-in-Furness (1 mile south), Chapels (1 mile north), Grizebeck (1 mile north-east), Foxfield (2 miles north-west) and Gawthwaite (3 miles north-east). We also work in nearby towns such as Barrow-in-Furness (9 miles south), Ulverston (5 miles south-east), Hindpool (9 miles south), Salthouse (9 miles south), Dalton-in-Furness (6 miles south) and Risedale (9 miles south).
Near you in Wall End
Typical jobs here are in homes near Church of St Cuthbert, among other places. Wall End’s nearest station is Kirkby-In-Furness station, roughly 0.5 miles south-west of the centre. Other landmarks nearby include Millom Castle (4 miles west) and Millom Hospital (4.2 miles south-west). For a walk, there’s Hodbarrow Nature Reserve and Wood Houses Tarn.
About our accreditations · Every repair comes with a one-year guarantee.
