Cumbria · England
Bath Repair for Dalton-in-Furness homes
Problem with your bath in Dalton-in-Furness? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
Bath repair in Dalton-in-Furness without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Whether it’s deep scratches in acrylic and damage beneath the taps, we can help.
A one-year guarantee comes as standard.
- Area
- Dalton-in-Furness (LA15, LA13)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Simple care helps the repair last. We recommend:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Repair or replace in Dalton-in-Furness?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Dalton-in-Furness clients choose us
- Most jobs done in one visit
- Colour mixed on the day to match
- A year’s guarantee on all work
- Technicians who travel to you, UK-wide
Read our full price list or bath cost comparison.
Questions from Dalton-in-Furness
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you quote from pictures?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the day after, the bath is ready to use.
How to prepare
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
When to call us in Dalton-in-Furness
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Signs it’s time to call us include:
- Holes from dropped items
- Scuffs and scratches in the surface
- Rusty patches near the plughole
- Chips under the taps
Before you book anyone
- How long the guarantee is and what it covers
- What aftercare is recommended
- How your room will be protected
- How the colour is matched
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When we’d advise against a repair
It helps to know what we cannot do:
- A bath that moves underfoot, until its support is fixed
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Towns and villages near Dalton-in-Furness
Other services in Dalton-in-Furness
Dalton-in-Furness and the surrounding area
Dalton-in-Furness is about 3 miles north-east of Barrow-in-Furness, in Cumbria. Our repair technicians come to homes and businesses in Dalton-in-Furness and nearby villages, so you do not need to take anything anywhere. Dalton-in-Furness is one of 438 places in Cumbria where we work. Our jobs stretch from Dalton-in-Furness to Liverpool (about 53 miles away).
Here we cover the LA15 and LA13 postcode area. Streets in the area include Market Street, Station Road and Market Place, and we cover them all. Close by, we cover Newton (1 mile south), Stainton with Adgarley (1 mile south-east), Lindal in Furness (2 miles north-east), Marton (2 miles north) and Little Urswick (2 miles east). We also work in nearby towns such as Barrow-in-Furness (3 miles south-west), Ulverston (4 miles north-east), Hindpool (3 miles south-west), Salthouse (3 miles south-west), Risedale (3 miles south) and Vickerstown (5 miles south-west).
What’s near Dalton-in-Furness
Our customers here include homes close to Seventh Day Adventist Church With Attached Railings, Chappells Tavern and Chapel Street Infants and Nursery School, among other places. There is a railway station in Dalton-in-Furness itself: Dalton station. Other landmarks nearby include Furness Abbey Museum (1.5 miles south-west) and Dalton Castle (within half a mile west). Green spaces nearby include Birkrigg Common and North Walney.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
