Lancashire · England

Bath Repair for Walmer Bridge homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Walmer Bridge. Send pictures for a free, fixed quote.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Walmer Bridge

How we handle bath repair in Walmer Bridge

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We regularly repair cast iron enamel, pressed steel enamel and acrylic, and common reasons people contact us are cracks in an acrylic bath and holes from dropped items.

All our work comes with a one-year guarantee.

Before and after: a damaged acrylic bath corner repaired in place
Where
Walmer Bridge (PR4)
County
Lancashire
Warranty
12 months on all our work
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Keeping it looking good

It’s all simple stuff:

  • Get any new chip repaired before it rusts
  • Cover the bath during DIY or decorating
  • A dripping tap stains enamel, so fix it early
  • Avoid scourers, wire wool and gritty cream cleaners

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

FAQs for Walmer Bridge

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.

What happens after I send photos?

We review the pictures and send a fixed quote and the next dates we have.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

How do I get a price for bath repair in Walmer Bridge?

Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Is a holed acrylic bath repairable?

Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.

Why repair rather than replace?

A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Nothing taken out or refitted
  • CHAS, Constructionline and SafeContractor accredited
  • Colours mixed by hand to suit your surface
  • No extra charge for your area

Read our full price list and resurfacing vs replacement cost guide.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What we cannot put right

We won’t take on work that won’t last, so these are the limits:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the whole surface, which needs re-enamelling
  • Acrylic cracks with no access behind them

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel

What we are called out for in Walmer Bridge

Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.

Most people get in touch when they notice one of these:

  • Scratches you can feel with a fingernail
  • A chip where the taps sit
  • Chips along the edge of the bath
  • Hairline or through cracks in acrylic

Before booking anyone

  • Who turns up on the day
  • How your room will be protected
  • What happens if they find more damage
  • Whether cleaning and preparation are in the price

Choosing a repair company

How the visit works

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It usually takes a few hours, depending on the damage, and you can get on with other things while we’re there.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Let us know about parking or access
  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings

How to get a price

Email us pictures of the damage and a wider shot of the entire item, with your PR4 postcode, and we will come back with a fixed quote.

Send photos for a quote

Read more

What affects the price in Walmer Bridge

Repairs from £95. You will know the full cost before booking. We take into account:

  • Access to the area
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • A picture taken from further back
  • Details of any past repairs

If you’re in Walmer Bridge and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

About Walmer Bridge

Walmer Bridge is about 3 miles south-west of Penwortham, in Lancashire. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We cover all 482 towns and villages in Lancashire. Our jobs stretch from Walmer Bridge to Liverpool (22 miles away).

All of PR4 is within our area, from the main roads to the quietest streets. From Old Mill Court, Liverpool Old Road and Hunters Fold or a nearby road, we can come to you. Other places close to Walmer Bridge include Little Hoole Moss Houses (1 mile south-east), Longton (1 mile north), Bottom of Hutton (2 miles north), Hutton (2 miles north-east) and New Longton (2 miles east). Further out, we also cover Preston (5 miles north-east), Chorley (8 miles south-east), Lytham St Anne's (9 miles west), Bamber Bridge (5 miles east), Leyland (4 miles east) and Fulwood (6 miles north-east).

What’s near Walmer Bridge

We visit homes around Little Hoole Primary School, Hutton Grammar School and St Andrew's Church and the streets around them. The nearest railway station is Croston station, about 3.1 miles south. Other landmarks nearby include Preston Royal Infirmary (5.4 miles north-east) and Penwortham Castle (4.1 miles north-east).

Map of Walmer Bridge © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.