Sandwell · England
Bath Repair for Bescot homes
Our technicians come to Bescot for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Snagging damage from a refit
Repairing versus replacing in Bescot
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Honest advice, even when it means no job
- Colour mixed on the day to match
Read our pricing and bath cost comparison.
How we handle bath repair in Bescot
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on roll-top & freestanding, pressed steel enamel and acrylic, and people most often call us about a chip where the taps sit and a hole punched through by something heavy.
Every repair is covered by our one-year guarantee, wherever you are in Sandwell.
- Area
- Bescot (WS1, WS10, WS2)
- Area hub
- Sandwell
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Bescot
Other services in Bescot
What we are called out for in Bescot
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Bescot contact us are:
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- Chips on the rim or sides
- A kit repair that didn’t last
Before booking anyone
- What preparation is included
- What the guarantee covers, and for how long
- Whether the price covers travel
- Who will actually do the work
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours, depending on the damage. We clean up when we are done and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Questions from Bescot
Which areas do you work in?
All of Sandwell, and the rest of the UK. There is no extra charge for travel.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is a holed acrylic bath repairable?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Do you come to Bescot?
Yes, we do. Technicians travel to Bescot from across the region, and the price is the same as everywhere else.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bescot and nearby
Bescot is about 1 mile north-east of Wednesbury, in Sandwell. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Bescot is one of 33 towns and villages in Sandwell where we work. Our jobs stretch from Bescot to Birmingham (about 8 miles away).
Our visits in WS1, WS10 and WS2 are booked in the same way as anywhere else. Whether you live on Kent Road, Devon Road and Smith Road or a nearby road, a technician can come to you. You’ll find Bescot on the M6 and A461, which makes it straightforward to reach. Neighbouring places we cover include Palfrey (1 mile north), The Delves (1 mile east), Caldmore (1 mile north-east), Highgate (1 mile north-east) and Walsall (1 mile north-east). Within a short drive, we also cover Tipton (4 miles south-west), Oldbury (5 miles south), Smethwick (5 miles south), Rowley Regis (5 miles south-west), Reddal Hill (7 miles south-west) and Cradley Heath (7 miles south-west).
Local landmarks in Bescot
Our clients here include homes close to Palfrey Junior School, Joseph Leckie Academy and Horse and Jockey pub. You’ll also find Wood Green Academy (0.8 miles west), Walsall Arboretum (1.9 miles north-east) and St Mary & All Saints (0.5 miles north). Bescot has its own railway station: Bescot Stadium station. Further afield, we also cover the area around New Square (3.1 miles south) and Jerome K Jerome Birthplace Museum (1.2 miles north). Not far away are Pouk Hill and Sot's Hole Local Nature Reserve.
Honest limits
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
About our accreditations · Every repair comes with a one-year guarantee.
