Cornwall · England

Bath Repair in Warbstow

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Warbstow. Send pictures for a free, fixed quote.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Warbstow

Bath repair in Warbstow, done in place

Most of our bath repairs take a few hours, and the bath is back in use the next day. You won’t need a plumber or tiler, because nothing is disconnected. We’re frequently asked to fix a chip where the taps sit and an old repair that has yellowed or come loose, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
Warbstow (PL15)
Region
Cornwall
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

What affects the price in Warbstow

Repairs from £95. You won’t pay by the hour. The price is based on:

  • Access to the area
  • How much damage there is
  • How hard the colour is to match
  • Doing more than one item at once

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Quotes from your photos

When you take your pictures, these tips help us give you a firm price:

  • One sharp close-up of the damage
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

How to look after the repair

It’s all simple stuff, just a few sensible habits:

  • Ensure an acrylic bath is firm underfoot
  • Give the bath a quick rinse after use
  • Put a towel in the bath if you are working above it
  • Keep abrasive pads and gritty cleaners away from the bath

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.

Honest limits

To be straight with you, some problems need a different fix:

  • A bath that moves underfoot, until its support is fixed
  • Metal that has corroded all the way through
  • Leaks from the waste or overflow fittings (a plumber’s job)

Send us photos and we will tell you honestly before booking.

Materials we work on in Warbstow

  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which typically takes two to three hours for most chips. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, generally by the following day, the bath is ready to use.

Preparing for the visit

  • Have a window or extractor fan available
  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a fixed quote

Advice

Landlords, agents and businesses in Warbstow

We regularly work with letting and managing agents. Send the address, pictures and access details.

If you manage property in Warbstow, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Warbstow questions

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Do you come to Warbstow?

We do. Repair technicians travel to Warbstow from across the region, with no extra charge for travel.

What if the damage is worse than the photos show?

The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.

Can a cracked acrylic bath be fixed?

Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

Will there be a smell?

Expect a mild smell while we’re working that clears as it cures.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Will the repair show?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.

Do you need bath repair in Warbstow?

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

The most common problems we’re called about are:

  • A failed DIY repair that is discoloured or lifting
  • A chipped rim or side
  • A cracked acrylic bath
  • Scratches you can feel with a fingernail

Comparing quotes

  • How to care for the finish
  • Is the price fixed, and does it include VAT?
  • When it can be used again
  • How changes to the job are handled

10 questions to ask before you book

Our work in Warbstow

Warbstow is about 16 miles north of Liskeard, in Cornwall. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Warbstow is one of 644 places in Cornwall we cover.

We work across the PL15 postcode area. We regularly work on streets such as Knapmedown and Bury Close. If you are just outside Warbstow, we cover Wainhouse Corner (3 miles north-west), Marshgate (4 miles west), Laneast (4 miles south), Week Green (5 miles north) and Middle Crackington (5 miles north-west). We also work in nearby towns such as Launceston (9 miles south-east), Bude (10 miles north), Newport (8 miles east), Flexbury (10 miles north), Camelford (8 miles south-west) and Stratton (10 miles north).

What’s near Warbstow

In Warbstow, that means homes near Warbstow Community School and St Werburgh's Church, among other places. Well-known places in the area include Week St Mary Castle (4.7 miles north).

Map of Warbstow © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.