Cumbria · England
Bath Repair for Warcop homes
Problem with your bath in Warcop? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
About our bath repair in Warcop
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We work on roll-top & freestanding, cast iron enamel and acrylic, and people most frequently call us about a chipped rim or side and scratches you can feel with a fingernail.
We stand behind the work with a one-year guarantee.
- Area
- Warcop (CA16)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- How many areas need work
- Where the damage is and how we get to it
We charge the same wherever you are, so there’s no premium for Warcop. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we will explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Preparing for the visit
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Places near Warcop
More services for Warcop
Looking after it afterwards
It’s all simple stuff:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Get a dripping tap fixed promptly
- Rinse it down after each bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
What we work on
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
FAQs for Warcop
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you repair a hole in a bath?
Normally. Photos of the hole and the underside help us check.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Landlord and trade work in Warcop
If you manage property in Warcop, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About Warcop
Warcop is about 17 miles south-east of Penrith, in Cumbria. We visit customers in Warcop, so you don’t need to take anything anywhere. Warcop is one of 438 towns and villages in Cumbria where we work. We work right across the region, from Warcop to Newcastle upon Tyne (44 miles away).
We work across CA16. From Brookside and Chapel Garth or anywhere nearby, a technician can come to you. We also travel to Bleatarn (1 mile south-west), Little Musgrave (2 miles south-east), Great Musgrave (2 miles south-east), Soulby (3 miles south) and Brough (3 miles east). Further out, we also cover Appleby-in-Westmorland (5 miles north-west), Kirkby Stephen (5 miles south), Bongate (5 miles north-west) and Shap (11 miles west).
Local landmarks in Warcop
Locally, our jobs take us to homes close to Warcop CofE Primary School, St Columba's Church and The Fox pub, among other places. The closest station to Warcop is Appleby station, roughly 5 miles north-west. Well-known places in the area include Dyke Nook Farm Museum (1.1 miles north-west) and Brough Castle (2.9 miles east). For a walk, there is Murton Pike and Augill Pasture.
Common problems we fix in Warcop
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Keep an eye out for these signs:
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
Before booking anyone
- What happens if they find more damage
- The length of the guarantee and what it covers
- What protection goes down before work starts
- What preparation is included
About our accreditations · Every repair comes with a one-year guarantee.
