Cumbria · England
Bath chip & crack repair in Bleatarn, Cumbria
Bath repair in and around Bleatarn: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A kit repair that didn’t last
- A hole punched through by something heavy
Common questions in Bleatarn
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Bath repair in Bleatarn without replacing anything
A typical bath repair is a few hours’ work, and you can typically bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. Common call-outs are for a failed DIY repair that’s discoloured or lifting and rust spots around the plughole, on cast iron enamel, acrylic and whirlpool & spa baths.
Big or small, you get the same one-year guarantee in Bleatarn and across Cumbria.
- Location
- Bleatarn (CA16)
- Area hub
- Cumbria
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Places near Bleatarn
Other services in Bleatarn
What we’re called out for in Bleatarn
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted:
- Snagging damage from a refit
- Damage beneath the taps
- Impact holes in acrylic
- An old repair that has yellowed or come loose
Before you book anyone
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- What happens if they find more damage
- Whether a trained technician does the job
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the day after, the bath is ready to use.
Before we arrive
- Make sure the room can be ventilated
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why book with us
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
- One price list for the entire UK
Read our full price list or bath cost comparison.
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- The colour and finish to match
- The type of damage
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The material, if you know it
To get a price, send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
Our work in Bleatarn
Bleatarn is about 17 miles south-east of Penrith, in Cumbria. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Bleatarn is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Newcastle upon Tyne, about 45 miles away.
Our visits in CA16 work the same way as everywhere else we cover. We also cover the places around Bleatarn: Warcop (1 mile north-east), Little Musgrave (2 miles east), Soulby (2 miles south-east), Great Musgrave (2 miles east) and Crosby Garrett (3 miles south). Within a short drive, we also cover Appleby-in-Westmorland (5 miles north-west), Sedbergh (14 miles south), Kirkby Stephen (4 miles south-east), Bongate (5 miles north-west) and Shap (10 miles west).
Landmarks near Bleatarn
Bleatarn’s nearest station is Kirkby Stephen station, about 4.9 miles south-east. Other landmarks nearby include Brough Castle (3.7 miles east) and Dyke Nook Farm Museum (1.9 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
