East Riding of Yorkshire · England

Bath Repair in Wassand

Bath repair across Wassand and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Chips on the rim or sides
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Wassand

Landlord and trade work in Wassand

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

About our bath repair in Wassand

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. Whether it’s deep scratches in acrylic and chips caused by builders, we can typically put it right.

You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.

Area
Wassand (HU11)
County
East Riding of Yorkshire
Cover
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

How the visit works

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours, depending on the damage. We clean up when we are done and tell you when it’s ready to use.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the following day.

Preparing for the visit

  • Ensure the room can be ventilated
  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed price

Read more

Repairing versus replacing in Wassand

People often assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Wassand. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Straight answers about what a repair can do
  • Dust sheets down, tidy finish
  • One visit for most repairs
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our pricing or resurfacing vs replacement cost guide.

When to call us in Wassand

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Keep an eye out for these signs:

  • A chipped rim or side
  • A failed DIY repair that’s discoloured or lifting
  • Chips caused by builders
  • Rust by the waste and overflow

What your quote should include

  • What preparation is included
  • The length of the guarantee and what it covers
  • How the room is protected while they work
  • How long it needs to cure

10 questions to ask before you book

Wassand and nearby

Wassand is about 2 miles south-west of Hornsea, in East Riding of Yorkshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Wassand is one of 299 towns and villages in East Riding of Yorkshire we cover. We work right across the region, from Wassand to Leeds (about 55 miles away).

Here we cover the HU11 postcode area. If you’re just outside Wassand, we cover Sigglesthorne (1 mile west), Rise (3 miles south-west), Catwick (3 miles west), Little Catwick (3 miles west) and Long Riston (4 miles south-west). We also work in nearby towns such as Beverley (10 miles south-west), Bridlington (13 miles north), Driffield (12 miles north-west), Hessle (15 miles south-west), Cottingham (12 miles south-west) and Hedon (11 miles south).

Around Wassand

We visit homes around Church of St Giles, The Swan Inn and Hornsea School and Language College, among other places. Well-known places in the area include Hornsea Cottage Hospital (2.2 miles north-east). Open spaces near Wassand include Hornsea Mere.

Map of Wassand © OpenStreetMap contributors

Questions from Wassand

How invisible is a bath repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.

Are there extra charges for Wassand?

Travel is included in the price, with the same prices everywhere we work.

Can a cracked acrylic bath be fixed?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

Can tenants book a repair?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

What happens if you find more damage?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

What a repair cannot fix

We would rather lose a job than do one that won’t last, so these are the limits:

  • Water coming from the waste or taps rather than the bath
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Metal that has corroded all the way through

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

How to care for the repair

So the finish stays in good condition for years:

  • Rinse the bath after use, especially in hard water areas
  • Stick to mild cleaners and a soft cloth
  • Avoid scourers, wire wool and gritty cream cleaners
  • Cover the bath during DIY or decorating

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

What bath repair costs

Prices start from £95. We price every job individually. What matters most is:

  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • The material and finish
  • Where the damage is and how we get to it

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed price

Two or three clear photos are typically enough. Try to include:

  • A clear, close picture of the problem area
  • The material, if you know it
  • Where you are, by postcode
  • Details of any past repairs

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Repairs by material

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.