Staffordshire · England
Bath chip & crack repair in Wedge's Mills, Staffordshire
Bath repair in and around Wedge's Mills: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
The process
Nothing needs to be moved out of the room beforehand. We bring all our kit in the van, put protection down and start once you’re happy with the plan. Most jobs take two to three hours for most chips, and you can get on with other things while we’re there. For a rural address like Wedge's Mills, we plan the journey in advance: tell us about narrow lanes, gates, long drives or where to park. We bring everything needed for the bath repair, so there is no second trip.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Read more
Bath repair in Wedge's Mills, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There is no need to book a plumber or tiler, because nothing is disconnected. We work on acrylic, roll-top & freestanding and pressed steel enamel, and common reasons people get in touch are snagging damage from a refit and an old repair that has yellowed or come loose.
Rural addresses like Wedge's Mills just need a little planning. Tell us about narrow lanes, long drives or parking, and we will take care of the rest.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Wedge's Mills (WS11, WV10)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Nearby places to Wedge's Mills
What else we do in Wedge's Mills
Bath repair around Wedge's Mills
Rented homes near Cannock station (about 1.5 miles north-east) change hands often, and repairing baths between tenants is quicker than replacing them.
Wedge's Mills is about 2 miles south-west of Cannock, in Staffordshire. Across the WS11 area, a technician comes to you. Wedge's Mills is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 16 miles away.
All of WS11 and WV10 is within our area for bath repair, from the main roads to the quietest streets. If your bath is in a house or flat on Wood Lane, Woodhaven and Hall Meadow or anywhere close by, a technician can come to you. Nearby, we also carry out bath repair in Middle Hill (1 mile south), Four Crosses (1 mile north-west), Great Saredon (1 mile west), Bridgtown (1 mile east) and Hatherton (1 mile north). Larger places within reach include Stafford (9 miles north), Lichfield (9 miles east), Rugeley (7 miles north-east), Burntwood (5 miles east), Hednesford (3 miles north-east) and Wombourne (12 miles south-west).
Landmarks near Wedge's Mills
In Wedge's Mills, that means homes near Cheslyn Hay Sport and Community High School, among other places. Wedge's Mills’s nearest station is Cannock station, about 1.5 miles north-east. Well-known places in the area include Cannock Chase Hospital (1.6 miles north-east).
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
If you manage property in Wedge's Mills, we will quote for several properties at once. Just send photos for each address and we’ll price them together.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. In an older home in a village like Wedge's Mills, replacing a bath can be harder than it sounds: original pieces may not match modern sizes, and access can be awkward. A repair keeps the original.
Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why Wedge's Mills clients choose us
- Everything repaired in place
- No extra charge for your area
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
Take a look at our Prices page And Bath cost comparison.
Common problems we fix in Wedge's Mills
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
You may need us if you’ve spotted any of these:
- A chipped rim or side
- Damage beneath the taps
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
In the older streets of Wedge's Mills, around landmarks like St Saviours Church, an original cast iron or steel bath is worth keeping, and bath repair gives it years more use.
Comparing quotes
- When it can be used again
- If travel is included in the price
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
Honest limits
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- Acrylic cracks with no access behind them
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Common questions in Wedge's Mills
Do you cover villages like Wedge's Mills?
Yes. We cover villages and hamlets as well as towns. Let us know about access and parking.
Can you fix baths in a rental near Cannock station?
Yes, rental work is a big part of what we do.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Aftercare tips
After the repair has cured, a few habits help it last:
- A dripping tap stains enamel, so fix it early
- Don’t scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
