Staffordshire · England
Bath Re-enamelling for Wedge's Mills homes
Bath re-enamelling in Wedge's Mills without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our bath re-enamelling in Wedge's Mills
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are stains that won’t shift and a coating lifting around the plughole.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Area
- Wedge's Mills (WS11, WV10)
- County
- Staffordshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, including clearing up.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Wedge's Mills, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Repairing versus replacing in Wedge's Mills
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why us?
- A year’s guarantee on all work
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- Everything repaired in place
Take a look at our pricing or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Wedge's Mills. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The material
- The size and number of damaged areas
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- A wider photo showing the entire bath
- What it’s made of, if you know
- Your postcode, so we can check dates
- Any earlier repairs or coatings
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
FAQs for Wedge's Mills
Do you work in Wedge's Mills?
We do. We send a technician to Wedge's Mills for every job, and the price is the same as everywhere else.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Do you need bath re-enamelling in Wedge's Mills?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Signs it’s time to call us include:
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Stains that will not shift
What your quote should include
- What aftercare is recommended
- The length of the guarantee and what it covers
- How soon you can use it again
- If travel is included in the price
What a repair can’t fix
It helps to know what we cannot do too:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Also near Wedge's Mills
Also in Wedge's Mills
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Store bottles off the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Covering Wedge's Mills
Wedge's Mills is about 2 miles south-west of Cannock, in Staffordshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our jobs stretch from Wedge's Mills to Birmingham (about 16 miles away).
Every address in WS11 and WV10 is within our area. From Wood Lane, Woodhaven and Hall Meadow or a nearby road, we can come to you. Other places close to Wedge's Mills include Middle Hill (1 mile south), Four Crosses (1 mile north-west), Great Saredon (1 mile west), Bridgtown (1 mile east) and Hatherton (1 mile north). Within a short drive, we also cover Stafford (9 miles north), Lichfield (9 miles east), Rugeley (7 miles north-east), Burntwood (5 miles east), Hednesford (3 miles north-east) and Wombourne (12 miles south-west).
What’s near Wedge's Mills
Locally, our jobs take us to homes close to Cheslyn Hay Sport and Community High School, Longford Primary School and St Saviours Church. The closest station to Wedge's Mills is Cannock station, roughly 1.5 miles north-east of the centre. Well-known places in the area include Cannock Chase Hospital (1.6 miles north-east) and Cheslyn Hay North and Saredon (within half a mile south).
About our accreditations · Every repair comes with a one-year guarantee.
