Staffordshire · England
Bath Repair for Bridgtown homes
Bath repair for Bridgtown, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Chips caused by builders
- A hole punched through by something heavy
Where we work around Bridgtown
Bridgtown is about 2 miles south-west of Cannock, in Staffordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 512 places across Staffordshire. Our jobs stretch from Bridgtown to Birmingham (about 15 miles away).
Postcode districts we cover here: WS11 and WS6. You will find streets such as Vine Lane, Lilac Avenue and Walsall Road. With the A5 close by, Bridgtown is simple for us to get to. We also cover the places around Bridgtown: Littlewood (1 mile south), Wedge's Mills (1 mile west), Cheslyn Hay (1 mile south), Middle Hill (1 mile south-west) and Great Wyrley (1 mile south-east). Larger places within reach include Stafford (10 miles north-west), Tamworth (15 miles east), Lichfield (8 miles east), Rugeley (7 miles north-east), Burntwood (4 miles east) and Hednesford (3 miles north-east).
Landmarks near Bridgtown
Typical jobs here are in homes near Crystal Fountain Public House, Bridgtown Primary School and Great Wyrley Academy. Bridgtown’s nearest station is Cannock station, about 0.7 miles north of the centre. Further afield, we also cover the area around Cheslyn Hay North and Saredon (1.2 miles west) and Cannock Castle Ring (4.6 miles north-east).
Bath repair in Bridgtown, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because the bath does not move. We’re frequently asked to fix a chipped rim or side and scuffs and scratches in the surface, on roll-top & freestanding, pressed steel enamel and cast iron enamel.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Bridgtown (WS11, WS6)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Bridgtown
Landlords, letting agents and housing providers in Bridgtown use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bridgtown questions
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Are there extra charges for Bridgtown?
There’s no separate call-out charge. The fixed price covers the visit and the work.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
It’s been repaired before. Can you still fix it?
Usually, yes. The old repair comes out first, so mention it when you send photos.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Colour-matched on site
- Most jobs done in one visit
- Fixed prices from your photos
- Nothing taken out or refitted
Take a look at our prices page and bath cost comparison.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Prices and what affects them
Prices start from £95. You will know the full cost before booking. We look at:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Where the damage is and how we get to it
- Whether we combine several jobs
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- The postcode, so we can plan the visit
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the entire surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
Places near Bridgtown
What else we do in Bridgtown
What we are called out for in Bridgtown
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Look out for any of the following:
- Damage beneath the taps
- A chipped rim or side
- Rust by the waste and overflow
- Scuffs and scratches in the surface
Before booking anyone
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
