North East Lincolnshire · England
Bath Repair in Weelsby
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Weelsby and across North East Lincolnshire. Free, fixed quotes from your photos.
- Repairs from £95
- Rusty patches near the plughole
- A chip where the taps sit
How we handle bath repair in Weelsby
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We regularly repair roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and the jobs we see most are rust by the waste and overflow and a kit repair that didn’t last.
A one-year guarantee comes as standard.
- Area
- Weelsby (DN32, DN35, DN36)
- Area hub
- North East Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Weelsby
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Honest limits
A few problems are outside what a surface repair can do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly.
What we work on
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
About Weelsby
Weelsby is about 1 mile west of Cleethorpes, in North East Lincolnshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 34 towns and villages across North East Lincolnshire. Our nearest city page is Leeds, about 63 miles away.
Jobs in DN32, DN35 and DN36 are booked in the same way as anywhere else. We regularly work on streets such as Peaks Lane, Filey Road and Drew Avenue. Weelsby is on the A1031, which makes it straightforward to reach. We also cover the places around Weelsby: Old Clee (1 mile east), New Clee (1 mile north), Cleethorpes (1 mile east), East Marsh (1 mile north) and Scartho (1 mile south-west). Within a short drive, we also cover Immingham (7 miles north-west), Waltham (3 miles south-west), Healing (5 miles north-west), Laceby (4 miles west), Keelby (7 miles west) and South Killingholme (10 miles north-west).
What’s near Weelsby
We visit homes around Weelsby Woods, Old Clee Primary Academy and Church of the Holy Trinity and Holy Mary the Virgin. Nearby too are Oasis Academy Wintringham (0.6 miles south-west) and Beacon Academy (0.7 miles east). The nearest railway station is Grimsby Town station, roughly 1.2 miles north-west. Well-known places in the area include Diana (1.4 miles south-west) and Grimsby Castle (1.5 miles north-west).
Your questions about bath repair in Weelsby
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Which areas do you work in?
All of North East Lincolnshire, and the rest of the UK. Travel is included in the price.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and you will get one combined price.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Weelsby.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
How do I get a price for bath repair in Weelsby?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
What happens on the day
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know about parking or access
- Point us to the nearest place to park
- Let us know if it has been repaired before
Get a quote
For a price in Weelsby, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What we’re called out for in Weelsby
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
Keep an eye out for these signs:
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- Chips under the taps
Comparing quotes
- How your room will be protected
- The length of the guarantee and what it covers
- What aftercare is recommended
- Whether the colour is mixed to match
Places near Weelsby
What else we do in Weelsby
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- One-year guarantee on every repair
- A fixed quote before booking
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
Take a look at our prices page and guide to resurfacing and replacement costs.
What affects the price in Weelsby
Repairs from £95. You will know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- How many areas need work
- Access to the area
- Whether it’s a chip, crack, burn or wear
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
How to get a fixed price
You can generally get a fixed price without us visiting. To help us price it:
- The postcode, so we can plan the visit
- Any details about the material
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
About our accreditations · Every repair comes with a one-year guarantee.
