North East Lincolnshire · England
Bath Repair for Old Clee homes
Problem with your bath in Old Clee? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Rust by the waste and overflow
- A hole punched through by something heavy
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How we handle bath repair in Old Clee
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and people most frequently call us about cracks in an acrylic bath and a chip where the taps sit.
Big or small, you get the same one-year guarantee in Old Clee and across North East Lincolnshire.
- Area
- Old Clee (DN35, DN32)
- Area hub
- North East Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
How to prepare
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Ask for a price
If you’re in Old Clee and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Old Clee questions
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you come to Old Clee?
Yes. We cover the whole UK and come to Old Clee. Send pictures and we’ll quote, or call 0345 017 0787.
What does bath repair cost?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item with your DN35 postcode.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Places near Old Clee
What else we do in Old Clee
Old Clee and nearby
Old Clee is about 1 mile west of Cleethorpes, in North East Lincolnshire. Wherever you are in the DN35 postcode area, a technician comes to you. Old Clee is one of 34 towns and villages in North East Lincolnshire where we work. You can also see our page for Leeds, about 64 miles away.
Every address in DN35 and DN32 is covered, from the main roads to the quietest streets. Local streets include Clee Road, Unity Road and Church Lane. Main roads around Old Clee include the A46 and A1031, so getting to you is simple. Neighbouring places we cover include Cleethorpes (1 mile east), Weelsby (1 mile west), New Clee (1 mile north-west), East Marsh (1 mile north-west) and Humberston (2 miles south-east). Within a short drive, we also cover Immingham (8 miles north-west), Yarborough (3 miles west), Waltham (4 miles south-west), Nunsthorpe (3 miles west), Little Coates (3 miles west) and Healing (5 miles west).
Near you in Old Clee
Typical jobs here are in homes near Bursar Primary Academy, Weelsby Woods and The Coliseum Picture Theatre pub. Other local landmarks include Church of the Holy Trinity and Holy Mary the Virgin (within half a mile west), Havelock Academy (less than half a mile north-west) and Beacon Academy (less than half a mile south). For rail, the closest station is Cleethorpes station, roughly 0.9 miles north-east. Other landmarks nearby include Diana (2.1 miles south-west) and Doughty Museum (1.5 miles west).
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Prices and what affects them
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- What kind of damage it is
- How many areas need work
- Any earlier repairs that need removing first
- How hard the colour is to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- The material, if you know it
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
What a repair can’t fix
A repair is not right for every job, including:
- A steel bath rusted through
- Wear across the entire surface, which needs re-enamelling
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Aftercare tips
After the repair has cured, a few habits help it last:
- Check that an acrylic bath doesn’t move when you stand in it
- Protect the bath with a towel when doing jobs nearby
- Rinse it down after each bath
- Get any new chip repaired before it rusts
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Common problems we fix in Old Clee
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Common reasons people in Old Clee contact us include:
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- A kit repair that didn’t last
- A hole punched through by something heavy
What your quote should include
- When it can be used again
- How long the guarantee is and what it covers
- What prep work is covered
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
