Kent · England
Bath Repair for Westbere homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Westbere, with a one-year guarantee on every repair.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Snagging damage from a refit
Honest limits
A repair isn’t right for every job, including:
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
About our bath repair in Westbere
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. Whether it’s hairline or through cracks in acrylic and deep scratches in acrylic, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Westbere (CT2)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Our work in Westbere
Westbere is about 3 miles north-east of Canterbury, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 922 towns and villages across Kent, from the larger towns to small villages. Our jobs stretch from Westbere to London (about 55 miles away).
Our visits in CT2 work the same way as everywhere else we cover. Jobs here include addresses on Island Road, Pennington Close and Bushy Hill Road and the roads around them. We also travel to Hersden (1 mile north-east), Sturry (1 mile west), Calcott (2 miles north-west), Broad Oak (2 miles west) and Stodmarsh (2 miles east). Larger places within reach include Canterbury (3 miles south-west), Margate (11 miles north-east), Dover (14 miles south-east), Ramsgate (12 miles east), Broadstairs (13 miles east) and Whitstable (6 miles north-west).
Near you in Westbere
Locally, our jobs take us to homes close to Church of All Saints, Hersden Village Primary School and Ye Olde Yew Tree Inn, among other places. You’ll also find Spires Academy (under half a mile north) and Frank Montgomery School (less than half a mile north-east). The nearest railway station is Sturry station, about 1.2 miles south-west of the centre. Well-known places in the area include Canterbury Castle (3.9 miles south-west) and Canterbury Roman Museum (3.5 miles south-west). The countryside around Westbere includes West Blean and Thornden Woods.
Nearby places to Westbere
Also in Westbere
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
Preparing for the visit
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
Getting a price
Send us pictures of the damage and one of the whole item, and tell us you are in Westbere, and we’ll come back with a fixed quote.
Read more
Signs you need bath repair in Westbere
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People normally call us when they notice one of these:
- A kit repair that didn’t last
- Chips on the rim or sides
- A chip where the taps sit
- A hole punched through by something heavy
Before you book anyone
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- How your room will be protected
- Who turns up on the day
Westbere questions
Do you come to Westbere?
We do. Repair technicians travel to Westbere from across the region, and the price is the same as everywhere else.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Are there extra charges for Westbere?
We don’t add a call-out fee. Your fixed price includes everything.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover the whole of Kent?
Everywhere in the UK, Westbere included. Travel is included in the price.
How much does bath repair cost in Westbere?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Repair or replace in Westbere?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why Westbere customers choose us
- A year’s guarantee on all work
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
- Typically one visit, start to finish
See our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
