Staffordshire · England
Bath Repair in Wetwood
Damaged bath in Wetwood? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Bath repair in Wetwood without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You will not need a plumber or tiler, because nothing is disconnected. Whether it’s hairline or through cracks in acrylic and rusty patches near the plughole, we can generally put it right, whatever the material.
Every repair comes with our one-year guarantee.
- Area
- Wetwood (ST21)
- Area hub
- Staffordshire
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What else we do in Wetwood
Landlords, agents and businesses in Wetwood
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Wetwood. The price reflects:
- How much damage there is
- Unusual colours or finishes
- Access to the area
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- A picture taken from further back
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
About Wetwood
Wetwood is about 6 miles east of Market Drayton, in Staffordshire. We travel to clients in Wetwood and the surrounding area, so nothing has to leave your home. We cover all 512 towns and villages in Staffordshire. Our jobs stretch from Wetwood to Birmingham (about 35 miles away).
Our technicians cover all of the ST21 postcode area and the streets around it. From Fairoak Bank and Lodge Lane or a nearby road, we can come to you. We also travel to Fairoak (1 mile west), Croxton (1 mile south-east), Armsdale (1 mile south-west), Outlands (2 miles south) and Offleyhay (3 miles south-east). Larger places within reach include Stafford (11 miles south-east), Newcastle-under-Lyme (10 miles north-east), Longton (11 miles north-east), Stone (8 miles east), Alsager (14 miles north) and Kidsgrove (14 miles north).
Local landmarks in Wetwood
Typical jobs here are in homes near Church of St Peter, among other places. A little further out are Castle Hill (2.8 miles north). Open spaces near Wetwood include Jackon's Coppice and Marsh and Cop Mere.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
How it works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know about parking or access
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Getting a price
Send us photos of the damage and one of the whole item, and tell us you’re in Wetwood, and we’ll come back with a fixed quote.
Advice
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Your questions about bath repair in Wetwood
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Wetwood.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- We come to you, anywhere in the UK
- One price list for the entire UK
- Nothing taken out or refitted
- We’ll tell you if it’s not worth repairing
See our prices page and resurfacing vs replacement cost guide.
Looking after it afterwards
To keep it looking its best:
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Stick to mild cleaners and a soft cloth
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
