Staffordshire · England

Bath Repair for Outlands homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Outlands, with a one-year guarantee on every repair.

  • Repairs from £95
  • A cracked acrylic bath
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Outlands

Questions from Outlands

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Something went through my bath. Can it be fixed?

In most cases. Photos of the hole and the underside help us check.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

What happens once I’ve sent photos?

We come back with a fixed quote, usually with dates to choose from. You’re under no obligation.

How do I book?

Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.

Can you quote from photos?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Will there be a smell?

Expect a mild smell while we’re working, which fades afterwards.

How we handle bath repair in Outlands

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Common call-outs are for chips along the edge of the bath and a failed DIY repair that’s discoloured or lifting, in acrylic, pressed steel enamel and cast iron enamel.

All our work is covered by our one-year guarantee, wherever you are in Staffordshire.

Rusty chip next to a bath plughole, before and after repair
Where
Outlands (ST21)
County
Staffordshire
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

Repairing versus replacing in Outlands

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Outlands. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why Outlands clients choose us

  • Rooms protected and left tidy
  • We come to you, anywhere in the UK
  • Colours mixed by hand to suit your surface
  • Honest advice, even when it means no job

Read our prices page and guide to resurfacing and replacement costs.

Do you need bath repair in Outlands?

Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Clients typically contact us about:

  • Damage done while the bathroom was being fitted
  • Deep scratches in acrylic
  • A failed DIY repair that’s discoloured or lifting
  • A cracked acrylic bath

Questions to ask before you book

  • How your room will be protected
  • When it can be used again
  • A fixed price, and whether VAT is included
  • What prep work is covered

How to compare quotes

Outlands and the surrounding area

Outlands is about 7 miles east of Market Drayton, in Staffordshire. Jobs in Outlands are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 512 places in Staffordshire, from the larger towns to small villages. Our jobs stretch from Outlands to Birmingham (about 33 miles away).

Every address in ST21 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Langot Lane and New Inn Bank and the roads around them. If you’re just outside Outlands, we cover Armsdale (1 mile north-west), Adbaston (1 mile south), Fairoak (2 miles north), Croxton (2 miles north-east) and Wetwood (2 miles north). We also work in nearby towns such as Stafford (10 miles south-east), Newcastle-under-Lyme (11 miles north-east), Longton (12 miles north-east), Stone (8 miles east), Penkridge (14 miles south-east) and Adderley Green (12 miles north-east).

Near you in Outlands

Further afield, we also cover the area around Cheswardine Castle (3.2 miles west). Open spaces near Outlands include Cop Mere and Jackon's Coppice and Marsh.

Map of Outlands © OpenStreetMap contributors

What bath repair costs

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • How easy the damage is to reach
  • What the surface is made of
  • The colour and finish to match
  • The type of damage

A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Quotes from your photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • One sharp close-up of the damage
  • A photo taken from further back
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare

Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Outlands, and we will come back with a fixed quote.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Repairs by material

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

What we do, step by step

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take two to three hours for most chips, including clearing up.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Let us know if it has been repaired before
  • Open a window if you can
  • Keep pets and children out of the room while we work

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

Get a free quote

Related advice

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Acrylic cracks with no access behind them
  • Wear across the whole surface, which needs re-enamelling
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.