Gloucestershire · England
Bath chip & crack repair in Withington, Gloucestershire
Damaged bath in Withington? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage beneath the taps
Repairing versus replacing in Withington
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Straight answers about what a repair can do
- One price list for the entire UK
- We leave the room as we found it
- Colour-matched on site
See our pricing or resurfacing vs replacement cost guide.
Bath repair in Withington, done in place
Most of our bath repairs take a few hours, and the bath is back in use the next day. You won’t need a plumber or tiler, because the bath doesn’t move. We regularly repair whirlpool & spa baths, cast iron enamel and acrylic, and common reasons people get in touch are rust spots around the plughole and a cracked acrylic bath.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Withington (GL54)
- County
- Gloucestershire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
We will not take on work that won’t last, so these are the limits:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What affects the price in Withington
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- How hard the colour is to match
- Previous DIY repairs that have to come out
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
You can generally get a fixed quote without us visiting. To make it quick:
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
Most clients in Withington get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
About Withington
Withington is about 7 miles south-east of Cheltenham, in Gloucestershire. We travel to homes and businesses in Withington and the surrounding area, so nothing has to leave your home. Withington is one of 470 towns and villages in Gloucestershire where we work. We work right across the region, from Withington to Birmingham (44 miles away).
Our visits in GL54 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Brassington Gardens and Harnham Lane and the roads around them. Nearby, we also work in Shipton (2 miles north), Shipton Solars (2 miles north), Chedworth (3 miles south-east), Andoversford (3 miles north) and North Cerney (5 miles south). We also work in nearby towns such as Cheltenham (7 miles north-west), Gloucester (12 miles west), Stroud (14 miles south-west), Tewkesbury (13 miles north-west), St Paul's (7 miles north-west) and Cirencester (9 miles south).
Local landmarks in Withington
We visit homes around The Kings Head pub, Church of St Michael and Chedworth Nature Reserve. Green spaces nearby include Cotswolds.
Places near Withington
What else we do in Withington
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Withington, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Aftercare tips
So the finish stays in good condition for years:
- Clean with warm water and a mild detergent
- Fix dripping taps early to stop staining and limescale
- Cover the bath during DIY or decorating
- Make sure an acrylic bath is firm underfoot
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
FAQs for Withington
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Do you come to Withington?
Yes, we do. We send a technician to Withington for every job, with no extra charge for travel.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow two to three hours for most chips. Before we go, we will explain when it can be used and how to look after it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say right away whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
