Plymouth · England
Bath chip & crack repair in Woolwell, Plymouth
Bath repair in and around Woolwell: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips under the taps
- Chips on the rim or sides
About our bath repair in Woolwell
A typical bath repair is a few hours’ work, and the bath is back in use the next day. You won’t need a plumber or tiler, because nothing is disconnected. If you’re dealing with scuffs and scratches in the surface and an old repair that has yellowed or come loose, we can help, on pressed steel enamel, acrylic and cast iron enamel alike.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Location
- Woolwell (PL6)
- Area hub
- Plymouth
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Woolwell
Do you cover the entire of Plymouth?
The entire UK, including all of Plymouth. Just include your postcode and we will confirm dates.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How we price bath repair
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Doing more than one item at once
- How hard the colour is to match
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- Something in shot to show the size
- The material, if you know it
- Where you are, by postcode
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Woolwell
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
Read our prices page or bath cost comparison.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we will say what we think before you book.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Also in Woolwell
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Clear the area around the damage
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Common problems we fix in Woolwell
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
Most people get in touch when they notice something like this:
- Chips caused by builders
- Impact holes in acrylic
- A chip where the taps sit
- A kit repair that didn’t last
Questions to ask before booking
- How soon you can use it again
- Who turns up on the day
- How to care for the finish
- Is the price fixed, and does it include VAT?
Woolwell and nearby
Woolwell is about 3 miles north of Plymouth, in Plymouth. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Woolwell is one of 59 towns and villages in Plymouth where we work.
Jobs in PL6 work the same way as everywhere else we cover. Whether you live on Carron Lane, Woodend Road and Tramway Road or anywhere nearby, we can come to you. Other places close to Woolwell include Roborough (1 mile north-west), Southway (1 mile west), Estover (2 miles south), Crownhill (2 miles south-west) and Manadon (2 miles south-west). Within a short drive, we also cover Plymouth (3 miles south), Mannamead (4 miles south-west), Lipson (4 miles south), Mutley (4 miles south-west), North Prospect (4 miles south-west) and Stoke (5 miles south-west).
Local landmarks in Woolwell
Typical jobs here are in homes near St Anne, Notre Dame RC School and Lopes Arms, among other places. Also close by are Southway Library (1.2 miles west) and Bickleigh Down Church of England Primary School (less than half a mile west). The closest station to Woolwell is Bere Ferrers station, about 3.8 miles west of the centre. Further afield, we also cover the area around Plymouth Castle (4.9 miles south) and Derriford Hospital (1.4 miles south-west). Open spaces near Woolwell include Crown Hill Down.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Don’t leave razors or cans standing in the bath
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
