Bristol · England
Bath Resealing in Ashton Vale
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Ashton Vale and across Bristol. Send pictures for a free, fixed quote.
- Leaks at the edges
- Silicone smeared on tiles
- Black spots in the silicone
Bath resealing in Ashton Vale, done in place
Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. Whether it’s discoloured, yellow sealant and an untidy old seal, we can usually put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Ashton Vale (BS3, BS13)
- Area hub
- Bristol
- Warranty
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Ashton Vale: your questions answered
How do I get a price for bath resealing in Ashton Vale?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Repairs by material
Baths
We fill the bath before sealing, to open the joint fully.
Shower trays
Trays are sealed with weight on them, for the same reason.
Signs you need bath resealing in Ashton Vale
Sealant splits when the bath or tray moves, frequently because it was sealed while the bath was empty.
You may need us if you’ve spotted:
- Gaps in the seal
- Gaps by the taps
- A messy previous reseal
- Mould you can’t clean out
Before booking anyone
- How the room is protected while they work
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- The length of the guarantee and what it covers
What we cannot put right
It helps to know what we cannot do:
- A flexing bath
- Gaps so wide they need filling or trims before sealing
- Tiles that move, until they’re refixed
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
- Baths
Aftercare tips
How the surface is treated afterwards matters:
- Replace the seal when mould sets in
- Keep bottles off the joints
- Use the extractor fan
- Clean the sealant gently and regularly
Let it cure fully before using the bath or shower, normally about a day.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Why reseal now?
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Fixed prices from your photos
Read our pricing.
Ashton Vale and the surrounding area
Ashton Vale is about 1 mile south of Ashton Gate, in Bristol. Jobs in Ashton Vale are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in 89 places across Bristol, from the larger towns to small villages. We work right across the region, from Ashton Vale to Birmingham (78 miles away).
Every address in BS3 and BS13 is covered. Whether you live on Swiss Road, Bower Road and Hendre Road or anywhere nearby, a technician can come to you. Close by, we cover Ashton Gate (1 mile north), Bedminster Down (1 mile south-east), Bower Ashton (1 mile north-west), The Chessels (1 mile north-east) and Bedminster (1 mile north-east). Larger places within reach include Montpelier (3 miles north-east), Easton (3 miles north-east), Whitehall (4 miles north-east), Redfield (3 miles north-east), St Pauls (3 miles north-east) and Baptist Mills (3 miles north-east).
Near you in Ashton Vale
We visit homes around Church of St Oswald, The Angel Inn And Outbuilding To Rear and Greville Smyth Park, among other places. Nearby too are Ashton Vale Primary School (less than half a mile north-west) and Ashton Park School (0.6 miles north-west). The closest station to Ashton Vale is Parson Street station, roughly 0.6 miles east of the centre. Further afield, we also cover the area around National Lifeboat Museum (1.4 miles north-east) and Avon (2.1 miles north-east). Not far away are Tarn Lake and Brandon Hill.
How we price bath resealing
You’ll know the full cost before booking. We look at:
- Unusual colours or finishes
- Doing more than one item at once
- The size and number of damaged areas
- Where the damage is and how we get to it
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- A picture taken from further back
- A close-up of the damage, in focus
- What it’s made of, if you know
Send us pictures of the damage and a wider shot of the entire item, with your BS3 postcode, and we’ll reply with a fixed quote.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes about two hours for a bath, and we finish by cleaning up and talking you through the result.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Advice
Places near Ashton Vale
Other services in Ashton Vale
About our accreditations · Every repair comes with a one-year guarantee.
