Bristol · England

Bath Resealing for Ashton Gate homes

Local bath resealing for Ashton Gate: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Damp near the bath
  • An untidy old seal
  • Missing sealant behind the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Ashton Gate

Bath resealing at your home in Ashton Gate

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. A typical reseal takes a couple of hours, then it needs to cure. We work on baths, basins & vanity units and kitchen worktops & sinks, and the jobs we see most are stained silicone and damp near the bath.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Area
Ashton Gate (BS3, BS8, BS1)
Area hub
Bristol
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Your questions about bath resealing in Ashton Gate

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

How do I get a price for bath resealing in Ashton Gate?

Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

When can I use the bath after resealing?

Usually after around 24 hours. We’ll tell you the exact time.

Will there be a smell?

There may be a mild smell during the work.

Why it’s worth resealing in Ashton Gate

Putting new silicone over old does not last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • We leave the room as we found it
  • Normally one visit, start to finish
  • Same prices wherever you are
  • Everything repaired in place

Take a look at our pricing.

Aftercare tips

Nothing complicated is needed:

  • Keep the joints dry
  • Replace the seal when mould sets in
  • Give the seal a regular clean
  • Run the extractor fan during and after showers

Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

Landlords, agents and businesses in Ashton Gate

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Common problems we fix in Ashton Gate

In time, even good sealant discolours. Steam, soap and movement all wear it down.

Send us a picture if you notice any of these:

  • Silicone smeared on tiles
  • Black spots in the silicone
  • Water getting behind the bath or tray
  • Old sealant that looks dirty

Comparing quotes

  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled
  • What prep work is covered
  • How the colour is matched

10 questions to ask before booking

Materials and what they mean for the repair

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

The process

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow around two hours from start to finish. Before we go, we will explain when it can be used and how to look after it.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Let us know if it has been repaired before
  • Avoid using the area for a few hours before we arrive
  • Keep children and pets away from the room on the day

Ask for a price

Upload a picture of the damage and one of the whole item, with your BS3 postcode, and we’ll come back with a fixed quote.

Get a free quote

Related advice

Honest limits

It helps to know what we cannot do:

  • A flexing bath
  • Loose tiles, which need refixing first
  • Water damage behind the bath that needs a builder

If in doubt, send photos and we will say what we think.

Materials we repair

  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units

Prices and what affects them

There are no hourly rates or hidden extras. The price is based on:

  • Unusual colours or finishes
  • The size and number of damaged areas
  • Any earlier repairs that need removing first
  • Doing more than one item at once

We charge the same wherever you are, so there is no premium for Ashton Gate. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed quote

You can take the photos on your phone. Just make sure we can see:

  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area
  • Where you are, by postcode
  • Natural light rather than flash

The quickest way to a price is to send a couple of photos through our quote form or ring us. We will say straight away if a repair is the right fix.

Covering Ashton Gate

Ashton Gate is about 2 miles south-west of Bristol, in Bristol. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 89 places in Bristol, from the larger towns to small villages. You can also see our page for Birmingham, about 78 miles away.

Our repair technicians cover all of BS3, BS8 and BS1 and the streets around it. Whether you live on Lime Road, Back Road and Gore Road or a nearby road, we can come to you. Ashton Gate is on the A369, so it’s easy for us to reach. Other places close to Ashton Gate include The Chessels (1 mile east), Bower Ashton (1 mile west), Ashton Vale (1 mile south), Hotwells (1 mile north) and Bedminster (1 mile east). We also work in nearby towns such as Whitehall (3 miles north-east), Redfield (3 miles north-east), Baptist Mills (3 miles north-east), Lower Easton (3 miles north-east), Upper Easton (3 miles north-east) and Moorfields (3 miles north-east).

Landmarks near Ashton Gate

Around Ashton Gate, we work in homes near The Cottage Inn, Ashton Park School and Greville Smyth Park. Nearby too are St Mary Redcliffe and Temple School (1.4 miles east), Saint Francis Church (less than half a mile north-east) and Ashton Gate Primary School (less than half a mile north-east). Ashton Gate’s nearest station is Parson Street station, about 0.7 miles south-east of the centre. Nearby you’ll also find St Bartholomew's Hospital (1.5 miles north-east) and Avon (1.7 miles north-east). Open spaces near Ashton Gate include Brandon Hill and Tarn Lake.

Map of Ashton Gate © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.