Kent · England
Bath Resealing in Aycliffe
Bath resealing in and around Aycliffe: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Unsealed corners
- Gaps in the seal
- Leaks at the edges
Bath resealing in Aycliffe without replacing anything
We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, then it needs to cure. We’re often asked to fix stained silicone and black mould in the sealant, across shower trays & enclosures, wet rooms and basins & vanity units.
Whatever the size of the job, you get the same one-year guarantee in Aycliffe and across Kent.
- Area
- Aycliffe (CT17, CT15)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Clean the sealant gently and regularly
- Replace the seal when mould sets in
- Air the room after use
- Dry the seal after bathing
Leave the sealant to cure for the time we give you, normally about a day.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
How we price bath resealing
We price every job individually. What matters most is:
- The material
- The size and number of damaged areas
- Whether we combine several jobs
- What kind of damage it is
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- What it’s made of, if you know
- Something in shot to show the size
- A clear, close picture of the problem area
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.
Why reseal now?
Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Repair technicians who travel to you, UK-wide
- Rooms protected and left tidy
- Fixed prices from your photos
- A year’s guarantee on all work
Take a look at our prices page.
What happens on the day
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take a couple of hours.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Tell us about any previous repairs or coatings
- Open a window if you can
- Point us to the nearest place to park
Get a quote
Email us a picture of the damage and a wider shot of the entire item, with your CT17 postcode, and we’ll reply with a fixed price.
Related advice
When a repair isn’t the answer
It helps to know what we cannot do too:
- Tiles that move, until they’re refixed
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
When to call us in Aycliffe
No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint flexes each time the bath fills.
The most common problems we’re called about are:
- Black mould in the sealant
- Gaps in the seal
- A messy previous reseal
- Damp near the bath
Before booking anyone
- How your room will be protected
- How long the guarantee is and what it covers
- How changes to the job are handled
- What aftercare is recommended
Covering Aycliffe
Aycliffe is about 1 mile south of Tower Hamlets, in Kent. Customers in Aycliffe get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We work in 922 places in Kent, from the larger towns to small villages. Our nearest city page is London, about 66 miles away.
We cover every part of CT17 and CT15 and the streets around it. Jobs here include addresses on Manor Road, Mount Road and Rugby Road. Neighbouring places we cover include Maxton (1 mile north), Farthingloe (1 mile north-west), Church Hougham (2 miles west), Dover (2 miles north) and River (2 miles north). We also work in nearby towns such as Canterbury (15 miles north-west), Folkestone (6 miles west), Deal (8 miles north-east), Hythe (10 miles west), Walmer (8 miles north-east) and Hawkinge (6 miles west).
Landmarks near Aycliffe
We visit homes around Western Heights LNR, Crown & Sceptre pub and Astor College for the Arts and the streets around them. Other local landmarks include Aycliffe Church Centre (less than half a mile south) and Aycliffe Community Primary School (less than half a mile west). The closest station to Aycliffe is Dover Priory station, roughly 1.1 miles north-east. Other landmarks nearby include Royal Victoria Hospital (1.3 miles north-east) and Old Town Gaol (1.3 miles north-east). Green spaces nearby include Dover Western Heights.
Places near Aycliffe
More services for Aycliffe
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
Baths are resealed with water in them, to open the joint fully.
Aycliffe: your questions answered
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Why does my sealant keep going mouldy?
Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Which areas do you work in?
The whole UK, including all of Kent. Send your postcode with your photos and we will confirm dates.
Do you seal over the old sealant?
We always remove the old sealant completely. Fresh silicone doesn’t stick to old.
How long does silicone take to cure?
Typically after around 24 hours. We will tell you the exact time.
About our accreditations · Every repair comes with a one-year guarantee.
