Gloucestershire · England

Bath & shower resealing (mastic) in Aylburton, Gloucestershire

Our technicians come to Aylburton for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Water getting behind the bath or tray
  • Black mould in the sealant
  • Old sealant that looks dirty
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Aylburton

About our bath resealing in Aylburton

A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, as one neat, continuous bead. If you are dealing with missing sealant behind the taps and leaks at the edges, we can normally put it right.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Area
Aylburton (GL15)
County
Gloucestershire
Guarantee
A year, on every repair
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Common problems we fix in Aylburton

A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.

Common reasons people in Aylburton contact us include:

  • Sealant that’s split or lifting
  • A messy previous reseal
  • Leaks at the edges
  • Discoloured, yellow sealant

Before you book anyone

  • Whether they match the colour on site
  • What happens if they find more damage
  • How long it needs to cure
  • How the room is protected while they work

How to compare quotes

Aylburton and nearby

Aylburton is about 7 miles north of Thornbury, in Gloucestershire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Aylburton is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Aylburton to Birmingham (about 59 miles away).

Every address in GL15 is within our area, from the main roads to the quietest streets. From Church Road, High Street and Orchard Close or a nearby road, we can come to you. Other places close to Aylburton include Alvington (1 mile south-west), Allaston (2 miles north-east), Lydney (2 miles north-east), Woolaston (2 miles south-west) and Brockhollands (2 miles north). Within a short drive, we also cover Stroud (14 miles east), Quedgeley (14 miles north-east), Kingsway Village (14 miles north-east), Cam (8 miles east), Stonehouse (12 miles east) and Dursley (9 miles east).

Near you in Aylburton

Typical jobs here are in homes near Cross Inn, Church of St Mary and Aylburton Church of England Primary School. The nearest railway station is Lydney station, about 1.1 miles east of the centre. Other landmarks nearby include Lydney Park Museum (less than half a mile east) and Little Camp Hill (less than half a mile north). Green spaces nearby include Ridley Bottom.

Map of Aylburton © OpenStreetMap contributors

Different materials, different repairs

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

We fill the bath before sealing, to open the joint fully.

When a repair is not the answer

It helps to know what we can’t do:

  • Rotten walls or floors behind the bath
  • Gaps so wide they need filling or trims before sealing
  • Loose tiles, which need refixing first

If in doubt, send photos and we will say what we think.

What we work on

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Baths

The process

Arrival times are agreed in advance, so you know when to expect us. On site, it takes about two hours for a bath in most cases. The room is left tidy and ready to use once it has cured.

  1. First we strip out every bit of the old mastic.
  2. The joint is cleaned and any mould treated.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Before we arrive

  • Clear the area around the damage
  • Mention if the room is upstairs or in a flat
  • Let us know about parking or access

How to get a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Related advice

Landlord and trade work in Aylburton

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Your questions about bath resealing in Aylburton

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

How do I stop mould in sealant?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

How much does bath resealing cost in Aylburton?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Do the materials smell?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Air the room after use
  • Reseal when black spots won’t clean off
  • Clean the joints with a mild cleaner
  • Don’t stand toiletries on the seal

Let it cure fully before using the bath or shower, normally around 24 hours.

Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Is resealing worth it?

Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. A proper reseal removes the old first. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why choose Surface Doctor in Aylburton

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • We will tell you if it’s not worth repairing
  • Same prices wherever you are

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.