Greater London · England
Bath & shower resealing (mastic) in Barnehurst, Greater London
Local bath resealing for Barnehurst: photo quotes, tidy work and a year’s guarantee.
- Unsealed corners
- Stained silicone
- Mould you can’t clean out
What your bath or shower is made of matters
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Bath resealing in Barnehurst without replacing anything
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Common call-outs are for unsealed corners and stained silicone, across wet rooms, shower trays & enclosures and kitchen worktops & sinks.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Barnehurst (DA7, DA1, DA8)
- Region
- Greater London
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Barnehurst
What else we do in Barnehurst
About Barnehurst
Barnehurst is about 3 miles east of Welling, in Greater London. From the centre of Barnehurst to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 764 towns and villages in Greater London. You can also see our page for London, about 12 miles away.
Every address in DA7, DA1 and DA8 is within our area, from the main roads to the quietest streets. From Old Road, Grove Road and Manor Road or anywhere nearby, we can come to you. Being close to the A2000, Barnehurst is simple for us to get to. Nearby, we also work in Bexley Riverside (1 mile north), Northumberland Heath (1 mile north), Crayford (1 mile south-east), North End (1 mile east) and Barnes Cray (1 mile east). Further out, we also cover London (12 miles west), City of Westminster (14 miles west), Marylebone (14 miles west), St Pancras (13 miles west), Shoreditch (12 miles north-west) and Walthamstow (12 miles north-west).
Around Barnehurst
Locally, our jobs take us to homes close to Mayplace Primary School, St Catherine's Catholic School and Church of St Paulinus and the streets around them. Nearby too are The Red Barn pub (0.5 miles north-west), St Catherine's Catholic School (0.7 miles south-west) and Braeburn Park (1.1 miles south). Barnehurst’s nearest station is Barnehurst station, about 0.5 miles north-west. Other landmarks nearby include Bexley Museum (1 mile south) and Erith and District Hospital (1.1 miles north). Open spaces near Barnehurst include Wansunt Pit.
- Local facilities include Colyers (0.7 miles north)
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we cannot put right
We will always be straight with you, so here’s what a repair will not do:
- Movement in the bath or tray
- Loose tiles, which need refixing first
- Water damage behind the bath that needs a builder
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
Barnehurst questions
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What areas do you cover?
Across the UK, so Barnehurst is covered. Our prices are the same everywhere.
What does bath resealing cost?
We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I stop mould in sealant?
Mould needs moisture. Ventilation and drying keep it clean longer.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Why does the silicone keep cracking?
Something is moving. Persistent splitting can mean the support needs attention.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes around two hours, and we finish with a tidy-up and a look at the finished work together.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Let us know if it has been repaired before
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Resealing in Barnehurst: why it matters
Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. A proper reseal removes the old first. Our prices are the same across the UK, with no extra for Barnehurst. The job itself decides the price: the material, the amount of damage and how many items.
Why Barnehurst clients choose us
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- No extra charge for your area
- One visit for most repairs
Take a look at our pricing.
Prices and what affects them
We price every job individually, from your photos. What matters most is:
- What the surface is made of
- The colour and finish to match
- The size and number of damaged areas
- What kind of damage it is
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
Send pictures for a quote
We price nearly every job from photos. This is what we need:
- One sharp close-up of the damage
- Natural light rather than flash
- A picture taken from further back
- Where you are, by postcode
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
When to call us in Barnehurst
Joints split if the bath or tray moves, frequently because it was sealed while the bath was empty.
The most common problems we’re called about are:
- Black mould in the sealant
- Old sealant that looks dirty
- Water getting behind the bath or tray
- An untidy old seal
Questions to ask before booking
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- What preparation is included
- How to care for the finish
How to look after the repair
Once the work has cured, treat it gently:
- Air the room after use
- Do not stand toiletries on the seal
- Reseal when black spots won’t clean off
- Keep the joints dry
Leave the sealant to cure for the time we give you, typically around 24 hours.
Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.
About our accreditations · Every repair comes with a one-year guarantee.
