Greater London · England
Bath Resealing for Slade Green homes
Bath resealing across Slade Green and nearby, done in a single visit in most cases and guaranteed for a year.
- A messy previous reseal
- Sealant that is split or lifting
- Black mould in the sealant
Bath resealing in Slade Green, done in place
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. If you’re dealing with silicone coming away from the tiles and mould you can’t clean out, we can help, on wet rooms, shower trays & enclosures and kitchen worktops & sinks alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Where
- Slade Green (DA8, DA1, DA7)
- County
- Greater London
- Cover
- 12 months on all our work
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath resealing in Slade Green
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
My seal keeps tearing. Why?
Something is moving. Persistent splitting can mean the support needs attention.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Is there any odour?
Expect a mild smell while we’re working.
Do you cover Slade Green?
Yes. We work across the UK and come to Slade Green. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you seal over the old sealant?
All the old sealant comes out. Fresh silicone does not stick to old.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
What do you need from me?
Use the quote form or ring 0345 017 0787.
How we price bath resealing
There’s no area surcharge for Slade Green. The price reflects:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The colour and finish to match
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
How to get a fixed quote
You can normally get a fixed price without us visiting. To make it quick:
- Any details about the material
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- One picture of the whole bath or shower
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say straight away whether it can be repaired.
Slade Green and the surrounding area
Slade Green is about 1 mile south-east of Erith, in Greater London. Anywhere in DA8, we come to you. Slade Green is one of 764 towns and villages in Greater London where we work. Our nearest city page is London, about 13 miles away.
We work across the DA8, DA1 and DA7 postcode area. Whether you live on Oak Road, Elm Road and Moat Lane or anywhere nearby, we can come to you. If you are just outside Slade Green, we cover North End (1 mile west), Barnes Cray (1 mile south), Bexley Riverside (1 mile west), Barnehurst (1 mile west) and Northumberland Heath (1 mile west). Within a short drive, we also cover London (13 miles west), City of Westminster (15 miles west), Marylebone (15 miles west), St Pancras (14 miles west), Shoreditch (12 miles west) and Walthamstow (13 miles north-west).
Near you in Slade Green
Locally, our jobs take us to homes close to Braeburn Park, St. Augustine's Church and Haberdashers' Aske's Crayford Academy and the streets around them. You will also find Railway Tavern (less than half a mile west) and St. Paul's (Slade Green) Church of England Primary School (under half a mile north-west). There’s a railway station in Slade Green itself: Slade Green station. Well-known places in the area include Stone Castle (3.9 miles south-east) and Colyers (1 mile west). Not far away are Wansunt Pit.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes around two hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Have a window or extractor fan available
Getting a price
If you’re in Slade Green and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Hidden water damage
- Gaps so wide they need filling or trims before sealing
- A flexing bath
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
Also near Slade Green
More services for Slade Green
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What your bath or shower is made of matters
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, to open the joint fully.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Let steam out after showers
- Dry the seal after bathing
- Reseal when black spots won’t clean off
- Clean the sealant gently and regularly
Avoid scraping the joints, and do not stand bottles on the seal.
Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
When to call us in Slade Green
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
You may need us if you’ve spotted any of these:
- Discoloured, yellow sealant
- Missing sealant behind the taps
- Damp near the bath
- An untidy old seal
Questions to ask before you book
- Whether there are any call-out or travel charges
- How changes to the job are handled
- Whether a trained technician does the job
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
