Warwickshire · England
Bath Resealing in Bearley Cross
Bath resealing in Bearley Cross without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Gaps in the seal
- Black mould in the sealant
- Damp near the bath
Bath resealing in Bearley Cross, done in place
A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they keep water out. We are frequently asked to fix old sealant that looks dirty and unsealed corners, on basins & vanity units, shower trays & enclosures and baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Where
- Bearley Cross (B95)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Bearley Cross: your questions answered
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you reseal over the old silicone?
All the old sealant comes out. Fresh silicone does not stick to old.
My seal keeps tearing. Why?
Usually because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How do I stop mould in sealant?
Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Resealing in Bearley Cross: why it matters
Resealing costs very little, and it protects everything around the bath. Leaving failed sealant can let water cause damage that costs far more to fix. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
- We leave the room as we found it
- Normally one visit, start to finish
Take a look at our pricing.
Different materials, different repairs
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Also near Bearley Cross
More services for Bearley Cross
Aftercare tips
Simple care helps the repair last. We recommend:
- Replace the seal when mould sets in
- Open a window after bathing
- Dry the seal after bathing
- Run the extractor fan during and after showers
Good ventilation is the best protection, and wipe the joints after use to keep mould away.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
When to call us in Bearley Cross
Joints split if the bath or tray moves, often because it was sealed while the bath was empty.
Customers normally contact us about:
- Old sealant that looks dirty
- Water getting behind the bath or tray
- Mould you cannot clean out
- Gaps by the taps
What your quote should include
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Who will actually do the work
- Whether the colour is mixed to match
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We tidy up before we leave and let you know when you can use it again.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
How to get a price
If you are in Bearley Cross and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- Tiles that move, until they’re refixed
- Water damage behind the bath that needs a builder
- Gaps so wide they need filling or trims before sealing
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
Our work in Bearley Cross
Bearley Cross is about 4 miles north-west of Stratford-upon-Avon, in Warwickshire. Our repair technicians come to customers in Bearley Cross and the surrounding area, so there is no workshop to go to. Bearley Cross is one of 324 places in Warwickshire where we work. Our jobs stretch from Bearley Cross to Birmingham (17 miles away).
Jobs in B95 work the same way as everywhere else we cover. If you are just outside Bearley Cross, we cover Newnham (1 mile south-west), Bearley (1 mile east), Pathlow (2 miles south), Wilmcote (2 miles south) and Wootton Wawen (2 miles north-west). Further out, we also cover Warwick (8 miles east), Royal Leamington Spa (10 miles east), Stratford-upon-Avon (4 miles south-east), Leamington Spa (10 miles east), Kenilworth (10 miles north-east) and Southam (15 miles east).
Local landmarks in Bearley Cross
Locally, our jobs take us to homes close to Church of St Mary, among other places. Bearley Cross has its own railway station: Bearley station. A little further out are Stratford Hospital (3.9 miles south-east) and Aston Cantlow (2.1 miles west). Open spaces near Bearley Cross include Henley Sidings.
What bath resealing costs
You will not pay by the hour. The price depends on:
- Access to the area
- How much damage there is
- Previous DIY repairs that have to come out
- The material
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- One picture of the whole bath or shower
- A clear, close picture of the problem area
- Natural light rather than flash
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
