Hampshire · England
Bath & shower resealing (mastic) in Belbins, Hampshire
Bath resealing across Belbins and nearby, typically in one visit and guaranteed for a year.
- Water getting behind the bath or tray
- Gaps by the taps
- Silicone smeared on tiles
How we handle bath resealing in Belbins
We reseal baths with them filled with water, so the joint opens fully, so the seal does not tear when the bath is first used. We regularly repair kitchen worktops & sinks, wet rooms and baths, and common reasons people contact us are black spots in the silicone and unsealed corners.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Belbins (SO51)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why reseal now?
Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- We’ll tell you if it’s not worth repairing
- One price list for the entire UK
- Most jobs done in one visit
- Everything repaired in place
Take a look at our full price list.
Places near Belbins
More services for Belbins
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Rotten walls or floors behind the bath
- Very wide gaps that need a trim
- A flexing bath
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Baths
How we price bath resealing
There’s no charge for travel to Belbins. The price depends on:
- The material
- How much damage there is
- What kind of damage it is
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- A wider photo showing the entire bath or shower
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, so the joint is at its widest.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Common problems we fix in Belbins
Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.
Customers normally contact us about:
- Unsealed corners
- Black mould in the sealant
- Discoloured, yellow sealant
- Silicone coming away from the tiles
What your quote should include
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
Our work in Belbins
Belbins is about 1 mile north of Romsey, in Hampshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Belbins is one of 683 places in Hampshire we cover. We work right across the region, from Belbins to London (about 69 miles away).
Every address in SO51 is covered, from the main roads to the quietest streets. From Belbins and Yokesford Hill or a nearby road, we can come to you. Nearby, we also work in Abbotswood (1 mile south-east), Braishfield (1 mile north-east), Crampmoor (2 miles south-east), Lower Slackstead (2 miles east) and Gosport (3 miles east). Within a short drive, we also cover Winchester (8 miles north-east), Eastleigh (7 miles south-east), Andover (14 miles north), Totton (7 miles south), Chandler's Ford (5 miles south-east) and Hedge End (11 miles south-east).
Around Belbins
Our clients here include homes close to Church of St Andrew, The Romsey School and Cupernham Junior School. Other local landmarks include The Dog & Crook pub (0.9 miles east) and Stanbridge Earls School (1.3 miles west). Belbins’s nearest station is Romsey station, about 1.4 miles south of the centre. Nearby you’ll also find Romsey Community Hospital (1.5 miles south) and King Johns House (1.6 miles south). For a walk, there is Emer Bog and Baddesley Common.
- Other local spots include Romsey Extra (2.5 miles south)
How the visit works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes around two hours for most jobs. The room is left tidy.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Get a quote
Most customers in Belbins get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
FAQs for Belbins
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
How do I get a price for bath resealing in Belbins?
We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you quote from pictures?
Normally, yes. Clear photos let us give you a fixed price without visiting.
How long does a reseal take?
Most reseals take about two hours. It then needs time to cure.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Why does mould come back so fast?
Mould needs moisture. Ventilation and drying keep it clean longer.
Landlord and trade work in Belbins
For anyone letting property in or around Belbins, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
