Swindon · England
Bath & shower resealing (mastic) in Bishopstone, Swindon
Bath resealing across Bishopstone and nearby, usually in one visit and guaranteed for a year.
- Silicone smeared on tiles
- Discoloured, yellow sealant
- Missing sealant behind the taps
Bath resealing at your home in Bishopstone
We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours, then it needs to cure. Whether it’s a messy previous reseal and gaps by the taps, we can typically put it right.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Bishopstone (SN6)
- Region
- Swindon
- Warranty
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Resealing in Bishopstone: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why us?
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
- No need to remove anything
- Free fixed quotes from pictures
Take a look at our full price list.
Work for landlords and builders
Landlords, letting agents and housing providers in Bishopstone use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Bishopstone questions
What does bath resealing cost?
Because every job differs, we price from photos. You will get a fixed figure before you book.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can you reseal over the old silicone?
We always remove the old sealant completely. Fresh silicone does not stick to old.
Do you cover Bishopstone?
Yes, we do. Repair technicians travel to Bishopstone from across the region, with no extra charge for travel.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How long does resealing take?
Most reseals take about two hours. Leave it to cure before use.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
When a repair isn’t the answer
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- A flexing bath
- Hidden water damage
- Loose tiles, which need refixing first
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Bishopstone
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
Prices and what affects them
We give every job a fixed quote from pictures. This is what makes a difference:
- Whether we combine several jobs
- How hard the colour is to match
- The material
- How much damage there is
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
Phone photos are fine. Just make sure we can see:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Natural light rather than flash
- The material, if you know it
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
What we’re called out for in Bishopstone
Poor ventilation speeds things up: damp hangs around, and mould grows faster.
If you can see any of these, send us a picture:
- Discoloured, yellow sealant
- A messy previous reseal
- Mould you can’t clean out
- Gaps in the seal
Before booking anyone
- What prep work is covered
- How your room will be protected
- How to care for the finish
- Whether there are any call-out or travel charges
Our work in Bishopstone
Bishopstone is about 5 miles south-east of Stratton St Margaret, in Swindon. From the centre of Bishopstone to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 68 places across Swindon, from the larger towns to small villages. We work right across the region, from Bishopstone to Birmingham (about 64 miles away).
All of SN6 is within our area, from the main roads to the quietest streets. Local streets include High Street, Hocker Bench and Icknield Way. We also cover the places around Bishopstone: Idstone (1 mile north-east), Hinton Parva (1 mile west), Ashbury (1 mile north-east), Kingstone Winslow (2 miles north-east) and Bourton (2 miles north). Further out, we also cover Swindon (6 miles west), Stratton St Margaret (5 miles north-west), Royal Wootton Bassett (11 miles west), Haydon Wick (7 miles west), Priory Vale (7 miles north-west) and Freshbrook (8 miles west).
Landmarks near Bishopstone
In Bishopstone, that means homes near Royal Oak pub, Bishopstone Church of England Primary School and Parish Church of St Mary, among other places. Further afield, we also cover the area around Great Western Hospital (4.6 miles west). The countryside around Bishopstone includes Charlbury Hill.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Use the extractor fan
- Keep bottles off the joints
- Keep the joints dry
- Let steam out after showers
Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Places near Bishopstone
What else we do in Bishopstone
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. Allow about two hours for a bath, and we’ll tell you if anything changes.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Open a window if you can
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
