Perth and Kinross · Scotland

Bath Resealing for Blair Atholl homes

Bath, shower and sink resealing with new mould-resistant silicone at your home in Blair Atholl, with a one-year guarantee on every repair.

  • Stained silicone
  • Unsealed corners
  • Sealant that’s split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Blair Atholl

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Landlords, letting agents and housing providers in Blair Atholl use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Bath resealing at your home in Blair Atholl

Resealing is quick, but it transforms the look. Fresh joints make the whole room look cleaner, and they protect the walls and floor. We regularly repair basins & vanity units, wet rooms and kitchen worktops & sinks, and common reasons people get in touch are an untidy old seal and silicone coming away from the tiles.

You get a one-year guarantee, the same in Blair Atholl as everywhere else we work.

Area
Blair Atholl (PH18)
County
Perth and Kinross
Cover
A year, on every repair
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Clear toiletries, mats and anything else from around the area
  • Mention any parking restrictions or tricky access

Get a quote

To get a price, send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.

Send photos for a quote

Related advice

Common problems we fix in Blair Atholl

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

Common reasons people in Blair Atholl contact us include:

  • Silicone coming away from the tiles
  • Water getting behind the bath or tray
  • Silicone smeared on tiles
  • Old sealant that looks dirty

What your quote should include

  • Is the price fixed, and does it include VAT?
  • Whether the price covers travel
  • When it can be used again
  • What happens if the damage is worse than the photos show

How to compare quotes

Aftercare tips

Aftercare is simple, and it makes a real difference:

  • Reseal when black spots won’t clean off
  • Wipe the joints dry after use
  • Let steam out after showers
  • Clean the sealant gently and regularly

Let it cure fully before using the bath or shower, normally around 24 hours.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we’ll tell you if it needs a builder or plumber.

Common questions in Blair Atholl

Why does my sealant keep splitting?

Movement is the usual cause. We seal baths full of water.

Is the work guaranteed?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote with dates.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

How long before I can shower?

Usually after around 24 hours. We confirm before we leave.

Are there extra charges for Blair Atholl?

There is no separate call-out charge. The fixed quote covers the visit and the work.

About Blair Atholl

Blair Atholl is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 107 places across Perth and Kinross, from the larger towns to small villages. Our jobs stretch from Blair Atholl to Edinburgh (62 miles away).

All of PH18 is within our area, from the main roads to the quietest streets. From The Square, Invertilt Road and The Lane or anywhere nearby, a technician can come to you. You’ll find Blair Atholl on the B8079, which makes it straightforward to reach. Neighbouring places we cover include Bridge of Tilt (1 mile north), Old Blair (1 mile west), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (6 miles south-east). For island and remote addresses, call first so we can plan the visit.

Landmarks near Blair Atholl

We visit homes around Bridge Of Tilt and the streets around them. Blair Atholl has its own railway station: Blair Atholl station. A little further out are Atholl Country Life Museum (less than half a mile west) and Blair Castle (0.9 miles north-west). Not far away are Creag Odhar and Loch Moraig.

Map of Blair Atholl © OpenStreetMap contributors

What a repair cannot fix

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Movement in the bath or tray
  • Water damage behind the bath that needs a builder
  • Very wide gaps that need a trim

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths

Different materials, different repairs

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

We fill the bath before sealing, so the joint is at its widest.

What affects the price in Blair Atholl

Each job gets its own fixed price. This is what makes a difference:

  • What the surface is made of
  • Whether we combine several jobs
  • Whether it’s a chip, crack, burn or wear
  • How hard the colour is to match

We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

You can take the photos on your phone. Just ensure we can see:

  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection

For a price in Blair Atholl, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.