Perth and Kinross · Scotland
Bath Resealing for Moulin homes
Bath resealing across Moulin and nearby, done in a single visit in most cases and guaranteed for a year.
- Unsealed corners
- A messy previous reseal
- Black spots in the silicone
Bath resealing at your home in Moulin
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Our repair technicians work on shower trays & enclosures, basins & vanity units and wet rooms, and the jobs we see most are gaps in the seal and black mould in the sealant.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Moulin (PH16)
- Area hub
- Perth and Kinross
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Moulin
We charge the same across the UK, including Moulin. The price reflects:
- Where the damage is and how we get to it
- How many items we do on one visit
- What the surface is made of
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- Where you are, by postcode
- One sharp close-up of the damage
- One picture of the entire bath or shower
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say straight away whether it can be repaired.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes around two hours. We tidy up before we leave and tell you when it’s ready to use.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
What we are called out for in Moulin
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.
It’s worth getting a quote if you see:
- An untidy old seal
- Missing sealant behind the taps
- Black mould in the sealant
- Gaps in the seal
Questions to ask before booking
- What happens if the damage is worse than the photos show
- A fixed quote, and whether VAT is included
- What prep work is covered
- How your room will be protected
What we cannot put right
In fairness, some problems need a different fix:
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
- A flexing bath
If in doubt, send photos and we will say what we think.
Materials we work on in Moulin
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Wet rooms
Moulin: your questions answered
Do you cover the entire of Perth and Kinross?
We work UK-wide, so Moulin is covered. Our prices are the same everywhere.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you work in Moulin?
We do. Technicians travel to Moulin from across the region, and the price is the same as everywhere else.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Why does the silicone keep cracking?
Normally because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.
Towns and villages near Moulin
Also in Moulin
Landlord and trade work in Moulin
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Moulin and the surrounding area
Moulin is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Jobs in Moulin are booked in like any other job: a fixed price from your photos, then a visit to do the work. Moulin is one of 107 towns and villages in Perth and Kinross where we work. You can also see our page for Edinburgh, about 57 miles away.
Our visits in PH16 work the same way as everywhere else we cover. Whether you live on Manse Road, Duff Avenue and Baledmund Road or anywhere nearby, a technician can come to you. Close by, we cover Pitlochry (1 mile south), Port na Craig (1 mile south), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (5 miles south-west).
What’s near Moulin
In Moulin, that means homes near The Old Mill Inn, Faskally Forest and Moulin Church and the streets around them. The closest station to Moulin is Pitlochry station, roughly 0.8 miles south-west of the centre. A little further out are Pitlochry Community Hospital (0.9 miles south-west) and Black Castle of Moulin (less than half a mile south-east). Not far away are Loch Broom.
Is resealing worth it?
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why Moulin customers choose us
- Fixed prices from your photos
- Typically one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
