Cornwall · England

Bath & shower resealing (mastic) in Bodelva, Cornwall

Bath resealing in and around Bodelva: photo quotes, tidy work and a year’s guarantee.

  • Black mould in the sealant
  • Stained silicone
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Bodelva

Prices and what affects them

There’s no charge for travel to Bodelva. The price depends on:

  • Doing more than one item at once
  • Unusual colours or finishes
  • Access to the area
  • The material and finish

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

Two or three clear photos are usually enough. It helps if you send:

  • A coin beside the damage so we can judge size
  • Natural light rather than flash
  • A clear, close picture of the problem area
  • What it’s made of, if you know

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Bath resealing at your home in Bodelva

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. A typical reseal takes a couple of hours, plus curing time. We work on shower trays & enclosures, basins & vanity units and kitchen worktops & sinks, and common reasons people get in touch are silicone coming away from the tiles and black spots in the silicone.

Big or small, it’s backed by a one-year guarantee.

Location
Bodelva (PL24)
County
Cornwall
Cover
One year on every repair
Quote
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Bodelva: your questions answered

How long does a reseal take?

Most reseals take about two hours. It then needs time to cure.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does mould come back so fast?

Mould needs moisture. Ventilation and drying keep it clean longer.

What information do you need?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

When can I use the bath after resealing?

We’ll give you the curing time.

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that is in the quote.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Is there a call-out fee?

We do not add a call-out fee. The fixed price covers the visit and the work.

Common problems we fix in Bodelva

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning can’t get it all out.

Contact us if you’ve noticed:

  • Silicone smeared on tiles
  • Leaks at the edges
  • Discoloured, yellow sealant
  • Black spots in the silicone

Comparing quotes

  • How to care for the finish
  • What prep work is covered
  • How long the guarantee is and what it covers
  • What happens if the damage is worse than the pictures show

10 questions to ask before booking

Looking after it afterwards

Once the work has cured, treat it gently:

  • Ventilate the bathroom well
  • Do not stand toiletries on the seal
  • Wipe the joints dry after use
  • Reseal at the first sign of lifting

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Is resealing worth it?

A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Bodelva clients choose us

  • Technicians who travel to you, UK-wide
  • One price list for the entire UK
  • Fixed prices from your photos
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our prices page.

Landlords, agents and businesses in Bodelva

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Bodelva and the surrounding area

Bodelva is about 2 miles north-east of Sandy Bottom, in Cornwall. Our technicians come to clients in Bodelva and the surrounding area, so there is no workshop to go to. Bodelva is one of 644 towns and villages in Cornwall where we work.

Here we cover the PL24 postcode area. Neighbouring places we cover include Tregrehan Mills (1 mile south-west), St Blazey Gate (1 mile south-east), Trethurgy (1 mile north-west), St Blazey (1 mile south-east) and Boscoppa (1 mile south-west). Further out, we also cover Truro (15 miles south-west), Newquay (15 miles west), Bodmin (8 miles north), Liskeard (14 miles north-east), Addington (14 miles north-east) and Wadebridge (12 miles north).

Landmarks near Bodelva

In Bodelva, that means homes near The Pack Horse Public House, Penrice Academy and Biscovey Academy and the streets around them. The closest station to Bodelva is Par station, about 1.6 miles east of the centre. Other landmarks nearby include Restormel (2.8 miles south-west) and St Catherine's Castle (4.8 miles south-east). The countryside around Bodelva includes Red Moor nature reserve and Hensbarrow Beacon.

Map of Bodelva © OpenStreetMap contributors

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

What happens on the day

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a couple of hours, and we leave the room as we found it.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Have a window or extractor fan available
  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job without visiting.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.