Staffordshire · England

Bath Resealing for Brewood homes

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Brewood and across Staffordshire. Free, fixed quotes from your pictures.

  • Old sealant that looks dirty
  • Black mould in the sealant
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Brewood

Bath resealing in Brewood without replacing anything

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours. If you’re dealing with sealant that’s split or lifting and silicone smeared on tiles, we can generally put it right, whatever the material.

Whatever the size of the job, it’s backed by a one-year guarantee in Brewood and across Staffordshire.

Roll-top bath being refinished by a Surface Doctor technician
Where
Brewood (ST19)
Area hub
Staffordshire
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Landlords, agents and businesses in Brewood

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, so the joint is at its widest.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair will not do:

  • Tiles that move, until they’re refixed
  • Very wide gaps that need a trim
  • Rotten walls or floors behind the bath

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Kitchen worktops & sinks

About Brewood

Brewood is about 6 miles north of Wolverhampton, in Staffordshire. Whether you’re in the middle of Brewood or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Brewood is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 18 miles away.

Our visits in ST19 work the same way as everywhere else we cover. Local streets include Market Place, Church Road and Deansfield Road. If you are just outside Brewood, we cover Somerford (1 mile north-east), Horsebrook (1 mile north), Crateford (1 mile east), Coven (2 miles south-east) and Standeford (2 miles south-east). We also work in nearby towns such as Stafford (9 miles north), Cannock (7 miles east), Lichfield (14 miles east), Rugeley (11 miles north-east), Burntwood (10 miles east) and Stone (15 miles north).

What’s near Brewood

We visit homes around Church of St Mary and St Chad and St Mary and St Chad CE (VC) First School and the streets around them. The closest station to Brewood is Codsall station, roughly 3.7 miles south of the centre. Further afield, we also cover the area around RAF Hospital Cosford (5.3 miles west).

Map of Brewood © OpenStreetMap contributors

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Don’t stand toiletries on the seal
  • Keep the joints dry
  • Clean the sealant gently and regularly
  • Replace the seal when mould sets in

Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Signs you need bath resealing in Brewood

Even good sealant eventually discolours particularly in a well-used bathroom. Steam, soap and movement all take their toll.

Contact us if you’ve noticed:

  • Gaps by the taps
  • A messy previous reseal
  • Black mould in the sealant
  • Silicone coming away from the tiles

What to look for in a quote

  • Who turns up on the day
  • What preparation is included
  • How long the guarantee is and what it covers
  • What aftercare is recommended

Choosing a repair company

The process

Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for about two hours for a bath. Before leaving, we tell you when it can be used and how to look after it.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Preparing for the visit

  • Ensure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed quote

Related advice

Brewood: your questions answered

Why does the silicone keep cracking?

Movement is the usual cause, or it was sealed with the bath empty. We seal baths full of water.

When can I use the bath after resealing?

Typically after around 24 hours. We confirm before we leave.

Do you cover Brewood?

We do. Repair technicians travel to Brewood from across the region, with no extra charge for travel.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What bath resealing costs

We price every job individually. The main factors are:

  • How easy the damage is to reach
  • How many items we do on one visit
  • How hard the colour is to match
  • How many areas need work

The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.

Getting a price from pictures

It only takes a minute to photograph the damage. Please include:

  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • Any details about the material
  • A coin or ruler next to the damage for scale

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.