Wiltshire · England

Bath & shower resealing (mastic) in Broad Chalke, Wiltshire

Bath, shower and sink resealing with new mould-resistant silicone in Broad Chalke, carried out at your home and guaranteed for a year.

  • Gaps in the seal
  • Damp near the bath
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Broad Chalke

Broad Chalke and the surrounding area

Broad Chalke is about 7 miles south-west of Salisbury, in Wiltshire. Across the SP5 area, a technician comes to you. We work in 425 places across Wiltshire, from the larger towns to small villages.

We work across SP5 and the streets around it. Streets in the area include Bulls Lane, South Street and The Causeway. We also travel to Bowerchalke (2 miles south-west), Croucheston (2 miles east), Faulston (2 miles east), Compton Chamberlayne (3 miles north) and Barford St Martin (4 miles north). Larger places within reach include Salisbury (7 miles north-east), Amesbury (12 miles north-east), Bugmore (7 miles east), Milford (8 miles east), Old Sarum (9 miles north-east) and Harnham (7 miles east).

Near you in Broad Chalke

Our clients here include homes close to Church of All Saints, Broad Chalke CofE Primary School and The Queens Head pub and the streets around them. Green spaces nearby include Compton Down.

Map of Broad Chalke © OpenStreetMap contributors

About our bath resealing in Broad Chalke

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Our technicians work on baths, kitchen worktops & sinks and basins & vanity units, and common reasons people get in touch are missing sealant behind the taps and damp near the bath.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Broad Chalke (SP5)
County
Wiltshire
Guarantee
12 months on all our work
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Is resealing worth it?

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why book with us

  • Everything repaired in place
  • One visit for most repairs
  • Rooms protected and left tidy
  • We come to you, anywhere in the UK

Read our pricing.

Landlord and trade work in Broad Chalke

We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

For anyone letting property in or around Broad Chalke, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

What we’re called out for in Broad Chalke

Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.

Common reasons people in Broad Chalke contact us include:

  • Discoloured, yellow sealant
  • Gaps in the seal
  • Silicone smeared on tiles
  • Missing sealant behind the taps

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • Whether the colour is mixed to match
  • Whether the price is fixed and includes VAT

Our hiring checklist

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Common questions in Broad Chalke

Do the materials smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What does bath resealing cost?

Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your SP5 postcode.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Why does my sealant keep splitting?

Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

What bath resealing costs

A fixed quote means you know the cost before you book. We look at:

  • Any earlier repairs that need removing first
  • How many areas need work
  • Unusual colours or finishes
  • What kind of damage it is

Our prices are the same across the UK, with no extra for Broad Chalke. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your photos

We price nearly every job from photos. This is what to send:

  • One picture of the whole bath or shower
  • A coin or ruler next to the damage for scale
  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know

If you’re in Broad Chalke and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

How the visit works

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to around two hours, tidy-up included.

  1. All the old sealant is cut out and removed.
  2. The joint is cleaned and any mould treated.
  3. We dry the joint thoroughly.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, taps included.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Point us to the nearest place to park
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.

Get a free quote

Advice

How to care for the repair

So the finish stays in good condition:

  • Run the extractor fan during and after showers
  • Give the seal a regular clean
  • Reseal when black spots will not clean off
  • Air the room after use

Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Hidden water damage
  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed

Send us photos and we’ll tell you honestly before you book.

Materials we repair

  • Shower trays & enclosures
  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.