Wiltshire · England

Bath Resealing for Barford St Martin homes

Local bath resealing for Barford St Martin: photo quotes, tidy work and a year’s guarantee.

  • A messy previous reseal
  • Unsealed corners
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Barford St Martin homes

Covering Barford St Martin

Barford St Martin is about 5 miles west of Salisbury, in Wiltshire. Whether you are in the middle of Barford St Martin or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Barford St Martin is one of 425 towns and villages in Wiltshire where we work.

Our technicians cover all of the SP3 postcode area and the streets around it. Streets in the area include Mount Lane, Short Lane and West Street. Nearby, we also work in Baverstock (2 miles west), Compton Chamberlayne (2 miles south-west), Dinton (3 miles west), Faulston (4 miles south) and Croucheston (4 miles south). Larger places within reach include Salisbury (5 miles east), Warminster (14 miles north-west), Amesbury (9 miles north-east), Bugmore (6 miles east), Milford (6 miles east) and Old Sarum (6 miles east).

Near you in Barford St Martin

Locally, our jobs take us to homes close to Church of St Martin. Well-known places in the area include East Castle (3.3 miles north-west) and Harvard Hospital (5.6 miles east). Green spaces nearby include Baverstock Juniper Bank and Compton Down.

Map of Barford St Martin © OpenStreetMap contributors

How we handle bath resealing in Barford St Martin

We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We are often asked to fix an untidy old seal and gaps in the seal, across wet rooms, shower trays & enclosures and basins & vanity units.

You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.

Area
Barford St Martin (SP3)
Area hub
Wiltshire
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What bath resealing costs

We price every job individually, from your photos. The main factors are:

  • How many areas need work
  • How hard the colour is to match
  • The type of damage
  • Doing more than one item at once

The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.

Send pictures for a quote

Phone photos are fine, there is no need for anything special. Just make sure we can see:

  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection
  • A wider photo showing the whole bath or shower
  • Any details about the material

Upload a picture of the damage and a wider shot of the whole item, with your SP3 postcode, and we’ll come back with a fixed quote.

When we would advise against a repair

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Gaps too big for silicone alone
  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Barford St Martin

  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

The process

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a couple of hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area

Get a quote

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.

Send pictures for a quote

Advice

Is resealing worth it?

Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why us?

  • One price list for the entire UK
  • A year’s guarantee on all work
  • Rooms protected and left tidy
  • CHAS, Constructionline and SafeContractor accredited

See our pricing.

Do you need bath resealing in Barford St Martin?

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.

People usually call us after spotting something like this:

  • Old sealant that looks dirty
  • Silicone coming away from the tiles
  • Leaks at the edges
  • A messy previous reseal

What your quote should include

  • Who turns up on the day
  • Whether there are any call-out or travel charges
  • What preparation is included
  • What happens if they find more damage

10 questions to ask before you book

Common questions in Barford St Martin

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

Can you quote from pictures?

In nearly every case. If photos do not show enough, we will ask for another angle.

How do I book?

Send pictures through the quote form or call 0345 017 0787.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Which areas do you work in?

All of Wiltshire, and the rest of the UK. Travel is included in the price.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Different materials, different repairs

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Landlords, agents and businesses in Barford St Martin

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.