Leicestershire · England
Bath Resealing in Brooksby
Bath, shower and sink resealing with new mould-resistant silicone in Brooksby, carried out at your home and guaranteed for a year.
- Gaps by the taps
- Old sealant that looks dirty
- Sealant that is split or lifting
Bath resealing at your home in Brooksby
Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. We work on shower trays & enclosures, wet rooms and basins & vanity units, and common reasons people contact us are black spots in the silicone and old sealant that looks dirty.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Brooksby (LE14)
- Area hub
- Leicestershire
- Cover
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Brooksby
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you reseal over the old silicone?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Are there extra charges for Brooksby?
We do not add a call-out fee. Your fixed quote includes everything.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does a reseal take?
A bath or shower usually takes a couple of hours. Leave it to cure before use.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Brooksby and the surrounding area
Brooksby is about 4 miles north-east of Syston, in Leicestershire. Customers in Brooksby get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Brooksby is one of 287 places in Leicestershire we cover. We work right across the region, from Brooksby to Birmingham (42 miles away).
Our visits in LE14 work the same way as everywhere else we cover. Local streets include Steeple Drive and Greenhouse Road, and we cover them all. We also cover the places around Brooksby: Hoby (1 mile north), Thrussington (2 miles west), Rearsby (2 miles south-west), East Goscote (3 miles south-west) and Ragdale (3 miles north). Larger places within reach include Loughborough (9 miles west), Wigston (11 miles south-west), Melton Mowbray (5 miles north-east), Coalville (15 miles west), Shepshed (12 miles west) and Syston (4 miles south-west).
Landmarks near Brooksby
Our clients here include homes close to Church of St Michael. For rail, the closest station is Syston station, about 4.5 miles south-west. Nearby you’ll also find The Mount motte at Melton Mowbray (4.9 miles east).
Materials and what they mean for the repair
Baths
We fill the bath before sealing, to open the joint fully.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Towns and villages near Brooksby
More services for Brooksby
The process
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a couple of hours, and we leave the room as we found it.
- We cut out and remove all of the old sealant.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Keep children and pets away from the room on the day
Get a quote
If you are in Brooksby and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- Gaps so wide they need filling or trims before sealing
- Loose tiles, which need refixing first
- Hidden water damage
Send us photos and we’ll tell you honestly before you book.
What we work on
- Basins & vanity units
- Shower trays & enclosures
- Baths
- Kitchen worktops & sinks
- Wet rooms
Aftercare tips
Aftercare is simple:
- Air the room after use
- Store bottles on a shelf
- Reseal when black spots will not clean off
- Dry the seal after bathing
Let it cure fully before using the bath or shower, normally about a day.
Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. Resealing early keeps water out of the walls and floor.
When to call us in Brooksby
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
The most common problems we are called about are:
- An untidy old seal
- Old sealant that looks dirty
- Unsealed corners
- Leaks at the edges
Comparing quotes
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- How soon you can use it again
- Who will actually do the work
What affects the price in Brooksby
We price every job individually. The main factors are:
- Whether we combine several jobs
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- A photo taken from further back
- Where you are, by postcode
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Landlord and trade work in Brooksby
Landlords, letting agents and housing providers in Brooksby use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
