Leicestershire · England
Bath Repair in Brooksby
Our repair technicians come to Brooksby for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
Repair or replace in Brooksby?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Why us?
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
- Colour mixed on the day to match
Take a look at our prices page or bath cost comparison.
Bath repair in Brooksby without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Common call-outs are for impact holes in acrylic and snagging damage from a refit, in cast iron enamel, acrylic and pressed steel enamel.
You get a one-year guarantee, the same in Brooksby as everywhere else we work.
- Where
- Brooksby (LE14)
- Area hub
- Leicestershire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Brooksby
Also in Brooksby
Landlords, agents and businesses in Brooksby
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- A steel bath rusted through
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Brooksby and nearby
Brooksby is about 4 miles north-east of Syston, in Leicestershire. Whether you’re in the middle of Brooksby or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Brooksby is one of 287 places in Leicestershire we cover. You can also see our page for Birmingham, about 42 miles away.
Here we cover the LE14 postcode area. Streets in the area include Steeple Drive and Greenhouse Road, and we cover them all. We also cover the places around Brooksby: Hoby (1 mile north), Thrussington (2 miles west), Rearsby (2 miles south-west), East Goscote (3 miles south-west) and Ragdale (3 miles north). We also work in nearby towns such as Loughborough (9 miles west), Wigston (11 miles south-west), Melton Mowbray (5 miles north-east), Coalville (15 miles west), Shepshed (12 miles west) and Syston (4 miles south-west).
What’s near Brooksby
We visit homes around Church of St Michael and the streets around them. The closest station to Brooksby is Syston station, roughly 4.5 miles south-west of the centre. Other landmarks nearby include The Mount motte at Melton Mowbray (4.9 miles east).
What bath repair costs
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- How hard the colour is to match
- The material and finish
- Whether we combine several jobs
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take two to three hours for most chips, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the next day, the bath is ready to use.
How to prepare
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Open a window if you can
Ask for a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Questions from Brooksby
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
How do I get a price for bath repair in Brooksby?
Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your LE14 postcode.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
About our accreditations · Every repair comes with a one-year guarantee.
