North Yorkshire · England
Bath Resealing for Burn homes
Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Burn. Send pictures for a free, fixed quote.
- Black mould in the sealant
- Water getting behind the bath or tray
- Gaps by the taps
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Replace the seal when mould sets in
- Clean the sealant gently and regularly
- Don’t stand toiletries on the seal
- Open a window after bathing
Leave the sealant to cure for the time we give you, usually around 24 hours.
Damp below or loose tiles need checking quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
About our bath resealing in Burn
All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We are often asked to fix black spots in the silicone and old sealant that looks dirty, in wet rooms, basins & vanity units and baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Burn (YO8)
- Region
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Burn
Joints split if the bath or tray moves, often because it was sealed with the bath empty.
These are the problems we’re asked about most:
- Stained silicone
- Unsealed corners
- A messy previous reseal
- Black spots in the silicone
Before you book anyone
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- How to look after the finish
Landlord and trade work in Burn
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Your questions about bath resealing in Burn
How long does resealing take?
A bath or shower usually takes a couple of hours. Leave it to cure before use.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Do you come to Burn?
Yes, we do. Repair technicians travel to Burn from across the region, and the price is the same as everywhere else.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Towns and villages near Burn
Also in Burn
What bath resealing costs
A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- The material
- What kind of damage it is
- Previous DIY repairs that have to come out
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- The material, if you know it
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
If you’re in Burn and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
When a repair is not the answer
Some jobs aren’t right for a repair, including:
- Loose tiles, which need refixing first
- Very wide gaps that need a trim
- A flexing bath
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & vanity units
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Wet rooms
Our work in Burn
Burn is about 3 miles south-west of Selby, in North Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Burn is one of 626 places in North Yorkshire where we work. We work right across the region, from Burn to Leeds (about 19 miles away).
Postcode districts we cover here: YO8. Streets in the area include Brick Kiln Lane, Park Lane and Burn Hall Crescent, all of which we cover. We also cover the places around Burn: Chapel Haddlesey (2 miles south-west), Gateforth Park (2 miles north-west), Thorpe Willoughby (2 miles north-west), Gateforth (2 miles west) and West Haddlesey (2 miles south-west). Further out, we also cover Selby (3 miles north-east), Tadcaster (12 miles north-west), Barlby (4 miles north-east), Cawood (6 miles north), Church Fenton (7 miles north-west) and Hemingbrough (5 miles east).
Local landmarks in Burn
Our customers here include homes close to Brayton High School, among other places. Burn’s nearest station is Selby station, about 2.8 miles north-east.
What your bath or shower is made of matters
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a couple of hours in most cases. We leave the room clean.
- First we strip out every bit of the old mastic.
- Next we clean the joint and deal with mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
