North Lanarkshire · Scotland
Bath & shower resealing (mastic) in Burnfoot, North Lanarkshire
Bath resealing across Burnfoot and nearby, done in a single visit in most cases and guaranteed for a year.
- Silicone coming away from the tiles
- Damp near the bath
- Mould you cannot clean out
How we price bath resealing
We price every job individually, from your photos. The main factors are:
- What kind of damage it is
- How many items we do on one visit
- Where the damage is and how we get to it
- The colour and finish to match
Our prices are the same across the UK, so there’s no premium for Burnfoot. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- The material, if you know it
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.
Bath resealing in Burnfoot, done in place
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Common call-outs are for mould you can’t clean out and old sealant that looks dirty, on kitchen worktops & sinks, wet rooms and baths.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Burnfoot (ML6)
- Region
- North Lanarkshire
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Keeping it looking good
How the surface is treated afterwards matters:
- Dry the seal after bathing
- Clean the sealant gently and regularly
- Replace the seal when mould sets in
- Don’t stand toiletries on the seal
Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Is resealing worth it?
Putting new silicone over old does not last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Same prices wherever you are
- Work done at your home or business
- No need to remove anything
- A fixed quote before booking
See our full price list.
Common questions in Burnfoot
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you reseal over the old silicone?
Never over old. It’s removed, cleaned off and the joint dried first.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
How do I stop mould in sealant?
Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
How long does resealing take?
Around two hours for a bath, then it needs to cure.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
How do I get a price for bath resealing in Burnfoot?
We give a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Towns and villages near Burnfoot
What else we do in Burnfoot
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take around two hours, and we leave the room as we found it.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Rotten walls or floors behind the bath
- Loose tiles, which need refixing first
- A bath or tray that moves, until its support is fixed
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
Landlords, agents and businesses in Burnfoot
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs in North Lanarkshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Covering Burnfoot
Burnfoot is about 1 mile north-west of Airdrie, in North Lanarkshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Burnfoot is one of 89 towns and villages in North Lanarkshire where we work. Our jobs stretch from Burnfoot to Glasgow (about 11 miles away).
Our technicians cover all of the ML6 postcode area. Local streets include Mill Road, High Street and Leaend Road. With the A8010 close by, Burnfoot is easy for our technicians to reach. Nearby, we also work in Airdrie (1 mile south-east), Glenmavis (1 mile north-west), New Monkland (1 mile north), Airdriehill (2 miles north-east) and Gartness (2 miles south-east). Further out, we also cover Motherwell (5 miles south), Cumbernauld (5 miles north), Wishaw (7 miles south), Bellshill (4 miles south), Kilsyth (8 miles north) and Shotts (8 miles south-east). Burnfoot is among the bigger towns we cover in North Lanarkshire.
What’s near Burnfoot
In Burnfoot, that means homes near Airdrie Academy, The Lodge Bar and Airdrie. The nearest railway station is Airdrie station, about 0.6 miles south. Further afield, we also cover the area around Weavers Cottage Museum (less than half a mile south-east) and Bedlay Castle (4.7 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
